Construction Kits for Scales
The individual weighing modules are also purchasable as construction kits for scales, as those also only consist of several different scale modules. The construction kits for scales consist of different main construction parts for building a weighing system. Two of them are the load cells and the indicators. Construction kits for scales are a proper solution for individual weighing tasks, since they are also well-priced. These weighing modules consisting of construction kits for scales are often found in objects that are extra large, like for example silos. Here the construction kits for scales are to be installed underneath the frame of the silos, in order to determine the containment of those. Depending on the measuring task, those construction kits for scales can take over a variety of additional tasks. Thus the construction kits for scales can for example control the silo's filling process, convert this weight into a standardized signal and thus the filling facility can properly react on it according to the given task. A flexible and multi-sided option for applying the construction kit for scales, qualify it as a favored measuring device in areas of industries and others. Please consider whilst compiling the construction kit for scales, that you need not only adjust it to the task, it will fulfill later, but also surrounding conditions, such as the weather, pollution, temperatures, possible dangers etc. Don't hesitate to call us if you wish to enquire about our indicators / displays for scales. If you can't find the indicators / displays for scales you are looking for, please contact us and we will help you find the best solution which suits your needs: UK customers +44(0) 23 809 870 30 / US customers (561) 320-9162. Our technical staff will advise you regarding our products. Our engineers and technicians will be happy to help you with the axle load scales, and of course, with the other products in the field of regulation and control, and measuring instruments. 

By clicking the following links you will be straightly redirected to the relevant category:

Indicators

Load Cells

Scale platforms

Here you can see approved scales from these companies:

Technical specifications for our Construction Kits for Scales can be found at the following links:

- Calibratable Construction Kits for Scales BSA-KPS Series
  (containing 4 x BSA cells up to max. 2 t per cells, 4 x panning foots SF-M12-STD and 1 x JB-4 clamp box)

Indicators

- Calibratable displays / indicators for construction kits for scales NT-200 Display series (*)
  (up to 6 weighing cells, 4- and 6- wires, resolution internally 200,000, resolution externally 20,000)

- Calibratable displays / indicators for construction kits for scales NT-201 Display series (*)
  (up to 6 weighing cells, 4 - and 6- wires, resolution internally 200,000, resolution externally 20,000)

- Calibratable indicators / displays for construction kits for scales CI Display series (*)
  (up to 8 weighing cells, 4 - and 6- wires, resolution internally 520,000, resolution externally 20,000)

- Calibratable indicators / displays for construction kits for scales CI-S Display series (*)
  (IP67, up to 8 weighing cells, 4- and 6- wires, resolution internally 520,000, resolution externally 20,000)

- Calibratable indicators / displays for construction kits for scales NT502 Display (*)
  (up to 8 weighing cells, 4 - and 6- wires, resolution int. 200,000, resolution ext. 20,000, 4 in- / outputs)

- Calibratable Construction Kits for Scales NT505 Display (*)
   (up to 8 weighing cells, 4 - and 6- wires, resolution int. 200,000, resolution ext. 20,000, 4 in- / outputs)

- Calibratable Indicators / Displays for construction kits for scalesNT570 Display (*) 
  (up to 8 weighing cells, 4 - and 6- wires, resolution int. 200,000, resolution ext. 20,000, 6 in- / 8 outputs)

- Calibratable construction kits for scales of the 3590E series
  (25 keys, 15 mm LED, IP65, for up to 16 load cells, 3 serial outputs, profi-bus optional)

- Calibratable construction kits for scales display of 3590E BOX series
  (Self-service system, incl. printer, stainless steel enclosure, IP65, for up to 16 weighing cells)

- Calibratable mobile construction kits for scales  display for 3590EKR series
  (with carrying case, 4 plug connections, incl. printer, 25 keys, battery-driven, for up to 16 weighing cells)

- Calibratable construction kits for scales DFWT series
  (17 keys, 25 mm LED or LCD, IP65, for up to 16 weighing cells, incl. printer, 30 tare archive)

- Construction kits for Scale Display for TSCR series
  (15 inch monitor, IP65, touch screen)

- Calibratable construction kits for scales Display of DFWLKR series
  (5 keys, 25 mm LCD, for up to 16 weighing cells, radio connection possible, incl. printer and case)

- Calibratable construction kits for scales Display for DFWLKRP series
  (17 keys, 25 mm LCD, for up to 8 platforms, radio connection possible, incl. printer and case)

- Calibratable construction kits for scales for DFWLAP series
  (5 keys, 25 mm LCD, for up to 4 / 8 platforms, max. 16 weighing cells, radio transfer)

- Calibratable stainless steel construction kits for scales Display of the DFWATEX3D Series
  (Opt. ATEX Dust Zone 22 , IP68, tare feed, summation, control weighing, opt. switch outputs)

- Calibratable stainless steel construction kits for scales Display of the DFWATEX3GD Series
  (Opt. ATEX Dust Zone 2 / 22 , IP68, tare feed, summation, control weighing, opt. switch outputs)

- Calibratable stainless steel construction kits for scales Display of the DFWATEX2GD Series
  (Opt. ATEX Zone 1 / 21 , IP68,  tare feed,, for up to 4 cells, opt. switch outputs)

- Calibratable stainless steel construction kits for scales Display of the DFWATEX2GDF Series
  (Opt. ATEX Zone 1 / 21 , IP68,  tare feed, for up to 4 cells, fiber-optic ports, opt. switch outputs)

- Calibratable stainless steel construction kits for scales Display of the DGT603GD
  (Opt. ATEX Zone 2 / 22 , IP68, 60 mm cipher height, Matrix LED, well readable from 25 m)

- Calibratable stainless steel construction kits for scales Display of the 3590E Series
  (IP68, for max. 16 cells, Graphic Touch Display, multilingual Software, profibus optional)

- Calibratable stainless steel construction kits for scales Display of the CPWE Series
  (IP65, max. 16 cells, various softwares, 16 optoisolated outputs 0.15A 48Vac / 0.15A 60Vdc)

- Calibratable stainless steel construction kits for scales Display of the CPWET Series
  (IP68, max. 16 cells, various softwares, 4 optoisol. outputs, Alibi storage, profibus optional)

- Calibratable stainless steel construction kits for scales Display der CPWETF Series
  (IP68, various Softwares, 16 optoisol. outputs, analogue interfaces and profibus optional)

- Calibratable construction kits for scales Display der DFWL Series
  (IP54, 25 mmm LCD, 5 keys, RS-232 bi-directional, counter function, control function, adapter and battery)

- Calibratable construction kits for scales Display der DFWLB Series
  (IP68, 25 mmm LCD, 5 keys, counter function, control function, adapter and battery)

- Calibratable construction kits for scales measuring converter of the DGT1 Series
  (for C busbar, max. 16 cells, time-date Alibi storage, serial query, analogue output optional)

- Calibratable construction kits for scales measuring converter of the DGT Series
  (for C busbar, max. 16 cells, up to 4 channels, optional 32, Alibi data storage, analogue outputs optional)

- Calibratable construction kits for scales measuring converter for the DGTQ Series
  (max. 16 cells, 4 independent channels, RS-232 / 485 bi-directional, analogue output optional)

- Calibratable construction kits for scales measuring converter for the DGTP Series
  (optional for up to 32 scales, 4 inputs and 6 outputs, panel embedding, analogue output optional)

- Calibratable construction kits for scales measuring converter for the DGT20 Series
  (optional for up to 32 scales, table and panel embedding, analogue output and profibus optional)

- Calibratable construction kits for scales measuring converter DGTPK Series
  (20 keys, 4 channels, optional for up to 32 scales, table- and panel installation, analogue outputs optional)

Load Cells

- Construction Kits for Scales BCL load cells series / BCL-M calibration permit (*)
  (above 1 kg, up to 200 kg, IP65, aluminum, single point, max. platform size up to 400 x 400 mm)

- Calibratable Construction Kits for Scales BCA load cells series (*)
  (above 5 kg, up to 100 kg, IP65, aluminum, C3/R60, max. platform size up to 400 x 400 mm)

- Calibratable Construction Kits for Scales BCM load cells series (*)
  (above 50 kg, up to 500kg, IP65, aluminum, C3/R60, max. platform size up to 600 x 600 mm)

- Calibratable Construction Kits for Scales BSA load cells series (*)
  (above 100 kg, up to 5 t, IP66, steel nickel-plated, C3/R60 permit, platform size unlimited)

- Calibratable Construction Kits for Scales BSS load cells series (*)
  (above 500 kg, up to 5 t, IP67, stainless steel, C3/R60 permit, shear beam cell, platform size unlimited)

- Calibratable Construction Kits for Scales HBS Load Cells series (*)
  (above 200 kg, up to 500 kg, IP67, stainless steel, C3/R60 permit, platform size unlimited)

- Calibratable Construction Kits for Scales: Load Cells series / SBA-L and XL with calibration permit (*)
  (above 25 kg, up to 5 t, IP65, steel nickel-plated, for tensile and compressive force measurements)

- Calibratable Construction Kits for Scales WBK load cells series (*)
  (above 10 t, up to 50t, IP68, stainless steel, C3/R60 permit, with lightning arrester, platform size unlimited)

- Calibratable Construction Kits for Scales cells of the SPO series
  (Single point cells, optional ATEX zone 2, weighing range up to 30 kg, max. platform size 300 x 300 mm)

- Calibratable Construction Kits for Scales: load cells of the SPG Series
  (Single point cells, optional ATEX zone 2, weighing range up to 100 kg, max. platform size 600 x 600 mm)

- Calibratable Construction Kits for Scales: load cells of the SPH Series
  (Single point cells, optional ATEX zone 2, weighing range up to 200 kg, max. platform size 500 x 500 mm)

- Calibratable Construction Kits for Scales: load cells of the SPBC Series
  (Single point cells, optional ATEX zone 2, weighing range up to 630 kg, max. platform size 700 x 700 mm)

- Calibratable Construction Kits for Scales: load cells of the SPSB Series
  (Single point cells, optional ATEX zone 2, weighing range up to 200 kg, max. platform size 400 x 500 mm)

- Calibratable stainless steel construction kits for scales: load cells for the SPSC Series
  (Single point cells, optional ATEX zone 2, weighing range up to 500 kg, max. platform size 600 x 600 mm)

- Calibratable stainless steel construction kits for scales: load cells of the SPSE Series
  (Single point cells, optional ATEX zone 2, weighing range up to 1,000 kg, max. platform size 800 x 800 mm)

- Calibratable stainless steel construction kits for scales: load cells of the SBK Series
  (Shear beams point cell, optional ATEX zone 2, weighing range up to 2,000 kg, protection type IP68, 350 Ohm)

- Calibratable stainless steel construction kits for scales: load cells of the SBK-1KL Series
  (Shear beams point cell, optional ATEX zone 2, weighing range up to 2,000 kg, protection type IP68, 1000 Ohm)

- Calibratable stainless steel construction kits for scales: load cells of the SBX-1KL Series
  (shear beams cell, optional ATEX zone 2, weighing range up to 5,000 kg, protection type IP68)

- Calibratable stainless steel construction kits for scales: of the FXC Series
  (Bending beams cell, optional ATEX zone 2, range up to 500 kg, protection type IP68, incl.. calibration permit)

- Calibratable stainless steel construction kits for scales: load cells of the RSB Series
  (double shear beams cell, optional ATEX zone 2, weighing range 25 t, IP68, nickel-plated steel)

- Calibratable stainless steel construction kits for scales: load cells of the DSBI Series
  (double shear beams cell, optional ATEX zone 2, weighing range 30 t, protection type IP68, stainless steel)

- Stainless steel construction kits for scales: load cells of the CP Series
  (Hydraulic load cells, optional ATEX Zone 2, weighing range up to 30 t, protection type IP68, stainless steel)

- Calibratable construction kits for scales: load cells of the STFC Series
  (S cells for tensile force measurement, optional ATEX zone 2, weighing range up to 10 t, protection type IP67)

- Calibratable stainless steel construction kits for scales: cells of the STG Series
  (for tensile and compressive force measurement, optional ATEX zone 2, up to 500 kg, protection type IP67)

- Stainless steel construction kits for scales: load cells of the RCP Series
  (Hydraulic load cells, optional ATEX zone 2, weighing range up to 50 t, protection type IP68, stainless steel)

- Stainless steel construction kits for scales: load cells of the RCA Series
  (compression load cell, optional ATEX zone 2, up to 30 t, protection type IP68, stainless steel construction)

Equipment

- Montage set for construction kits for scales: load cells of the SB Series
  (stainless steel AISI304, Optional ATEX certificate zone 2, for weighing range up to 5,000 kg)

- Montage set for construction kits for scales: load cells of the DSBI Series
  (stainless steel AISI304, Optional ATEX certificate Zone 2, up to 30 t, incl. protection against transverse forces)

- Montage set for construction kits for scales: load cells of the CP Series
  (stainless steel AISI304, Optional ATEX certificate Zone 2, up to 30 t, incl. protection against transverse forces)

- Construction kits for scales: JB clamp box Series 
  (for up to 4 load cells, with 4 potentiometers, depending on model IP65 or. IP64)

- Connection box JBQAI Series for construction kits for scales load cells
  (stainless steel IP66, ATEX certificate zone 2, with a max. of 4 inputs, screw terminals, resistor)

- Adapter PW200XRD Series for construction kits for scales
  (ATEX permit zone 1, for 230 V, 115 V or 24 V input voltage, aluminum die cast enclosure)

- Zener barriers KMB4 for construction kits for scales
  (Optional ATEX permit zone 2, ABS box, 4 load cells with each 350 Ohm connectable)

- Radio module OBRF3GD for construction kits for scales
  (to transfer results to computer or additional display, ATEX permit Zone 2, 868 MHz, max. 150 m)

Scale platforms

- Calibratable construction kits for scales platform of RPLC Series
  (Optional ATEX zone 2 / 22, range up to 15 kg resolution above 0.2 g, round platform, calibratable cell)

- Construction kits for scales PL-BW platform Series
  (weighing range up to 150 kg, platform size 410 x 520 mm, IP66, calibration permit M III, single point)

- Construction kits for scales PL-DB platform Series
  (weighing range up to 600 kg, platform size up to 600 x 700 mm, calibration permit M III, single point)

- Calibratable construction kits for scales platform of the T Series
  (Optional ATEX zone 2 / 22, range up to 600 kg resolution above 0.5 g, max. 700 x 700 mm, calibratable cells)

- Calibratable construction kits for scales platform of TE Series
  (Optional ATEX zone 2 / 22, range up to 600 kg resolution above 0,5 g, max. 700 x 700 mm, calibratable cells)

- Calibratable stainless steel construction kits for scales platform of LPI Series
  (Optional ATEX zone 2, up to 1,500 kg, resolution above 100 g, max. 1200 x 1500 mm, calibratable cells)

- Calibratable stainless steel construction kits for scales platform of PWI Series
  (Optional ATEX zone 2, range up to 3,000 kg, resolution above 100 g, U shape, 4 calibratable cells)

- Calibratable construction kits for scales: bars of BP Series / stainless steel BPSI Series
  (Optional ATEX zone 2, range up to 6,000 kg, resolution above 2 g, bulk-shape, 4 calibratable cells)

- Calibratable construction kits for scales platform of ET Series
  (Optional ATEX zone 2 / 22, up to 10 t resolution above 50 g, max. 2000 x 2500 mm, calibratable cells)

- Calibratable construction kits for scales platform of ETI Series
  (Optional ATEX Zone 2 / 22, range up to 10 t resolution above 50 g, max. 2000 x 2500 mm, calibratable cells)

- Construction kits for scales RWP platform Series
  (Range up to 15 t, platform size 900 x 500 mm, extra flat design, aluminum casting)

- Construction kits for scales RWZ platform Series
  (Range up to 15 t per wheel, resolution above 5 kg, IP65, radio connection, aluminum casting)

(*) Information on the calibratable construction kits for scales

The construction kits for scales that are marked (*) are modules, that are calibratable. Calibratable weighing modules scales are not yet calibrated, but they fulfill all requirements to be calibrated. But it should be considered that the weighing modules for scales can only be standardized, if the other components, e.g. the weighing cells, have a standardization permit and follow the whole range of standardization guidelines. In order to get assurance regarding the valid standardization guidelines and options, we suggest contacting the standardization authorities for the location of installation, since it is the controlling authority after all and can give you the most accurate information in order to get the standardization procedure in order.

If you wish to view or print a selection of Construction Kits for Scales from our catalogue, click PDF symbol: