Container
Scales
Container scales are scales that are used in areas of industries. Those help
continuously detecting the weight of large or smaller containers, and indicating
the filling level through the relevant weight. The container scales assure a
safe work procedure and represent an ideal option for monitoring filling levels.
Therefore we provide container scales with controlling outputs. Controlling
outputs of container scales can be potential-free contacts, analogue 4-20 mA
outputs, analogue 0-10 V outputs or inverted voltage outputs. Our assortment
also contains container scales that indicate the filling levels by means of
signal lights. Also, there is an option to monitor the container scales online.
Therefore the container scales are equipped with a LAN interface with individual
IP addresses and thus allow accessing the weight values. Whether those container
scales are made for bigger industries or simple little container scales for the
table, as used in private households, the principle is the same. Don't hesitate to call us if you wish to enquire about our
container scales. If you can't find the container scales you are looking for, please contact us and we will help you find the best solution which suits your needs: UK customers +44(0) 23 809 870 30 / US customers (561) 320-9162. Our technical staff will advise you regarding our products. Our engineers and technicians will be happy to help you with the
axle load scales, and of course, with the other products in the field of regulation and control, and measuring instruments.
Here you can see
approved scales from these companies:
|
Technical specifications for our Container Scales can be found at the following links:
|
-
Container Scales PCE-BT series
(weighing range up to 2,000 g, resolution above 0.001 g,
opt. potential free connection, 4-20 mA, 0-10 V)
|
|
-
Container Scales PCE-BDM series
(weighing range up to 30 kg, resolution above 0.05 g, opt.
potential free connection, 4-20 mA, 0-10 V)
|
|
-
Container Scales PCE-PB N series
(weighing range up to 60 kg, resolution above 20 g, USB
bidirectional, Auto Zero OFF function)
|
|
-
Container Scales
PCE-RS series
(weighing up to 1,500 kg, resolution above 0.2 kg, inverted
voltage output 0/5 V)
|
|
Calibratable
/ Calibrated Container Scales
|
-
Calibrated Container Scales
PCE-LS-series
(weighing range up to 3000 g, readability above 0.001 g, opt.
potential-free contact, 4-20 mA, 0-10 V)
|
|
-
Calibrated Container Scales PCE-LSM series
(weighing range up to 6000g,
resolution above 0.001g, opt.
potential-free contact, 4-20 mA, 0-10 V)
|
|
-
Calibrated Container Scales PCE-PM... T series
(weighing range up to 15 kg,
resolution above 0.1 g, RS-232, opt.
potential-free contact, 4-20 mA, 0-10 V)
|
|
-
Calibrated Container Scales CK / CK-SC with signal lights series
(weighing
range up to 30 kg, resolution above 2 g, IP67, stainless steel,
switch output module optional)
|
|
-
Container Scales
PCE-EP P series
(dual range, weighing range up to
max. 150 kg, resolution from 2 g, optional 4-20 mA, 2 in 1)
|
|
-
Calibrated Container Scales PCE-TP U series
(weighing range up
to 3,000 kg, resolution above 0.5 kg, opt. potential-free contact,
4-20 mA, 0-10 V)
|
|
-
Calibrated Container Scales PCE-TP B series
(weighing range up to 3,000 kg,
resolution above 0.5 kg, opt.
potential-free contact, 4-20 mA, 0-10 V)
|
|
-
Calibrated Container Scales PCE-TP E series
(weighing range up to 6,000 kg,
resolution above 0.1 kg, opt.
potential-free contact, 4-20 mA, 0-10 V)
|
|
-
Calibrated Container Scales PCE-TP F series
(floor fitting, up to 6,000 kg,
resolution above 0.1 kg, opt.
potential-free contact, 4-20 mA, 0-10 V)
|
|
-
Calibrated Container Scales PCE-TP - series
(weighing range up to 6,000 kg,
calibrating value above 0.1 kg, opt.
potential-free contact, 4-20 mA, 0-10 V)
|
|
-
Calibrated Container Scales PCE-TP...SST series
(IP 68/65, range up to 2,000 kg,
resolution above 0.1 kg, opt.
potential-free contact, 4-20 mA, 0-10 V
|
|
Container
Scales Displays
|
-
Calibratable Container Scales Display CI200S series
(up to 8 cells, 4- and 6- wires,
resolution int. 520,000, ext. 20,000, IP67, switch-output module optional)
|
|
-
Calibratable Container Scales Display NT502 series
(up to 8 weighing cells, 4- and 6-
wires, resolution int. 200,000, ext. 20,000, 4 in- and outputs)
|
|
-
Calibratable Container Scales Display NT505 series
(up to 8 cells, 4- and 6- wires,
resolution internally 200,000, ext. 20,000, 4 in- and outputs)
|
|
-
Calibratable Container Scales Display NT570 series
(up to 8 cells, 4- and 6- wires,
resolution internally 200,000, externally 20,000, 6 in- and 8 outputs)
|
|
Container
Scales Platforms
|
-
Container Scales PL-BW platform series
(weighing range up to 150 kg,
platform size 410 x 520 mm, IP66, calibration permit M III, singlepoint)
|
|
-
Container Scales PL-DB platform series
(weighing range up to 600 kg,
platform size up to 600 x 700 mm, calibration permit M III, singlepoint)
|
|
-
Container Scales HFSG platform series
(weighing range up to 3 t,
platform size up to 1,500 x 1,500 mm, calibration permit M III optional)
|
|
-
Container Scales RO platform series
(weighing range up to 3 t,
platform size up to 1,500 x 1,500 mm, calibration permit M III optional)
|
|
Container
Scales Cells
|
-
Container Scales BCL weighing cells series / BCL-M calibration permit
(above 1 kg, up to 200 kg, IP65,
aluminum, singlepoint, max. platform size up to 400 x 400 mm)
|
|
-
Calibratable Container Scales BCA weighing cells series
(above 5 kg, up to 100 kg, IP65,
aluminum, C3/R60, max. platform size up to 400 x 400 mm)
|
|
-
Calibratable Container Scales BCM weighing cells series
(above 50 kg, up to 500kg, IP65,
aluminum, C3/R60, max. platform size up to 600 x 600 mm)
|
|
-
Calibratable Container Scales BSA weighing cells series
(above 100 kg, up to 5 t, IP66, steel
nickel-plated, C3/R60 permit, platform size unlimited)
|
|
-
Calibratable Container Scales BSS weighing cells series
(above 500 kg, up to 5 t, IP67,
stainless steel, C3/R60 permit, shear beam cell, platform size unlimited)
|
|
-
Calibratable Container Scale HBS weighing cells series
(above 200 kg, up to 500 kg, IP67,
stainless steel, C3/R60 permit, platform size unlimited)
|
|
-
Calibratable Container Scale series / SBA-L and XL with calibration permit
(above 25 kg, up to 5 t, IP65, steel
nickel-plated, for tensile and compressive
force measurements)
|
|
-
Calibratable Container Scales WBK weighing cells series
(above 10 t, up to 50t, IP68,
stainless steel, C3/R60 permit, with lightning arrester, platform size
unlimited)
|
|
Container
Scales are often used for continuous measurements. A long-term measurement means
a continuous weight monitoring. If a
continuous weight monitoring by means of the container scales is planned, the
Auto-Zero-function should be considered. Container Scales with
Auto-Zero-function automatically set the weight on 0.00kg at every start. This
is the case when a subsequent installation has been performed. But there are,
depending on the container scales, limits to which the weighing procedures can
be performed, which should be also considered whilst selecting a suitable
container scale. Calibrated container scales for example can only be easily
started with load that does not exceed the weighing range by more than 10 %. In
case the weight at the start already exceeds the basic value, an error
indication will occur automatically at the display. In case the container scales
shall indicate already at the start the current weight in a loaded state, a
container scale with an deactivatable Auto-Zero function should be picked. Once
the Auto-Zero-function is deactivated, the container scales can be no longer
calibrated since the standardization guidelines forbid this function. Their
accuracy however will not be compromised.
|
|
If you wish to view or print a selection of
Container Scales from our catalogue, click PDF symbol:
|