|
Motorcar
Scales
Motorcar scales are scales built for detecting the weight of cars. The motorcar
scales facilitate assuring the safety in traffic by preventing overload or
onesided loading. For this type of control weighing we have smaller motorcar
scales in our assortment. One of these motorcar scales series is the PCE-CWC
series. These motorcar scales stand out due to a compact design with 26 x 7 x
2.5 cm and with a weight of 1 kg over a measurement range of up to 1,500 kg per
wheel. The scaling by means of the motorcar scales can be performed in two ways.
Once by driving the car on walking pace over the motorcar scale and calculating
afterwards the motorcar scale calculates the total weight of the motorcar. Or
the weight determination is performed by driving with the car onto the motorcar
scale, where it parks. But for this option at least two weight platforms are
required. Both weight platforms of the motorcar scales are then connected with
each other and the axle load or rather the total weight can then be determined.
If the motorcar scales are applied in custody transfer, they need to be
calibrated and the weight determination must be performed in only one step. This
means that the motorcar scales must weigh the whole motorcar at once. Don't hesitate to call us if you wish to enquire about our
motorcar scales. If you can't find the motorcar scales you are looking for, please contact us and we will help you find the best solution which suits your needs:  UK customers +44(0) 23 809 870 30 / US customers (561) 320-9162. Our technical staff will advise you regarding our products. Our engineers and technicians will be happy to help you with the
axle load scales, and of course, with the other products in the field of regulation and control, and measuring instruments.
Here you can see
approved scales from these companies:
  
Technical specifications for our Motorcar Scales can be found at the following links:
|
|
-
Motorcar Scales PCE-WWSB8
(Calibratable, mobile truck scale, two weighing platforms for max.
approx. 8,000 kg, display incl. printer)
|
 |
|
-
Motorcar Scales PCE-CWC series
(for axle load, coupling load and total load, weighing range up to
1,500 kg per wheel, coupling load up to 150 kg)
|
 |
|
-
Motorcar Scales RW series
(weighing range up to 10 t per wheel, resolution above 2 kg,
20 hrs with battery operation, up to 6 platforms)
|
|
|
-
Motorcar
Scales PCE-DPW 1
(weighing range up to 15 t per axle, resolution 10 kg, for
any size of vehicle, installation into ground)
|
|
|
-
Motorcar Scales RWP-Set series
(weighing range up to 15 t per wheel, resolution above 5 kg,
IP65, cable connection with up to 6 platforms)
|
 |
|
-
Motorcar Scales RWZ-set series
(weighing range up to 15 t per wheel, resolution above 5 kg,
IP65, cable connection with up to 12 platforms)
|
 |
|
-
Motorcar Scales WWSB series
(range up to 8 t per wheel, resolution above 0.2 kg, IP68,
available area 400 x 300, 10 m cable, weight 14.5 kg)
|
 |
|
-
Motorcar Scales WWSC series
(range up to
15 t per wheel, resolution above 0.5 kg, IP68, available area 500 x
400, 10 m cable, weight 18 kg)
|
|
|
-
Motorcar Scales WWSE series
(range up to
15 t per wheel, resolution above 2 kg, IP68, available area 700 x
450, 10 m cable, weight 26 kg)
|
|
|
-
Motorcar Scales WWSD series
(range up to
20 t per wheel, resolution above 2 kg, IP68, available area 900 x
500, 10 m cable, weight 42 kg)
|
|
|
-
Motorcar Scales WWSF series
(range up to
25 t per wheel, resolution above 5 kg, IP68, available area
900 x 700, 10 m cable, weight 67 kg)
|
|
|
-
Motorcar Scales WWSE-RF series
(range up to
25 t per wheel, resolution above 2 kg, IP68, available area 750 x
450, 10 m cable, weight 28 kg)
|
|
|
-
Motorcar Scales WWSD-RF series
(up to
20 t per wheel, resolution above 2 kg, IP68, available area
950 x 500, radiation connection, incl. display)
|
|
|
-
Motorcar Scales RWS series
(weighing range up to 25 t,
resolution above 5 kg, platform size 3,000 x 730 mm, for dynamic
weighing)
|
|
|
-
Calibratable Motorcar Scales WBSA series
(weighing range up to 25 t,
resolution above 5 kg, platform size 3,000 x 730 mm, for dynamic
weighing)
|
|
|
-
Calibratable Motorcar Scales DTW series
(weighing range up to 80 t,
resolution above 5 kg, drive-on platform max. 22 x 1 x 0.2 m, easily
transportable)
|
|
|
-
Calibratable Motorcar Scales of the 3590E series
(25 keys, 15 mm LED, IP65, for up to
16 load cells, 3 serial outputs, profi-bus optional)
|
|
|
-
Calibratable Motorcar Scales display of 3590E BOX series
(Self-service system, incl. printer,
stainless steel enclosure, IP65, for up to 16 weighing cells)
|
|
|
-
Calibratable mobile Motorcar Scales display for 3590EKR series
(with carrying case, 4 plug
connections, incl. printer, 25 keys, battery-driven, for up to 16 weighing
cells)
|
 |
|
-
Calibratable HGV Scale DFWT series
(17 keys, 25 mm LED or LCD, IP65, for
up to 16 weighing cells, incl. printer, 30 tare archive)
|
 |
|
-
HGV Scale Display for TSCR series
(15 inch monitor, IP65, touch screen)
|
 |
|
-
Calibratable Motorcar Scales Display of DFWLKR series
(5 keys, 25 mm LCD, for up to 16
weighing cells, radio connection possible, incl. printer and case)
|
 |
|
-
Calibratable Motorcar Scales Display for DFWLKRP series
(17 keys, 25 mm LCD, for up to 8
platforms, radio connection possible, incl. printer and case)
|
 |
|
-
Calibratable Motorcar Scales for DFWLAP series
(5 keys, 25 mm LCD, for up to 4 / 8
platforms, max. 16 weighing cells, radio transfer)
|
 |
|
-
Equipment for Motorcar Scales for WWSLM series
(Height modules for vehicle scales of
WWSE and WWSD series, size max. 1200 x 900 x 71 mm)
|
 |
|
 Depending
on their application, the motorcar scales need to be calibrated  and
standardized. At the time of their delivery the motorcar scales are adjusted. If
you wish to purchase a certificate for the adjustment, it needs to be ordered separately.
The calibration certificate of these motorcar scales are excluded from our
return policy. For a calibration the motorcar scales are sent to independent
calibration laboratories that are certificated according to DIN 17025. Due to
this dissemination, the delivery will take about 4 to 5 days additionally. But
if the motorcar scales are needed in a standardized state, first they need to be
calibratable, and second they must be standardized by an appointed institution.
A standardization means determining and confirming the accuracy of of the
motorcar scale. The initial calibration of the motorcar scale must be
performed by the producer at the time of the initial shipment, otherwise a
subsequent calibration of the motorcar scales can not be performed.
|
|
If you wish to view or print a selection of
HGV scales from our catalogue, click PDF symbol:
|
