DSO Oscilloscope Scopix OX7062
Digital hand-held oscilloscope / 2 separate galvanic channels / 60 MHz frequency range / 100 GS/s sampling rate / 5.7” coloured TFT touch panel LCD

The DSO Oscilloscope Scopix OX7062 provides fast and error-free usage due to the patented PROBIX plug-and-play accessory system. Measurement range, coefficients, units and channel configurators will be recognized automatically after connecting them to the oscilloscope. The DSO Oscilloscope Scopix OX7062 shows the first 32 harmonic oscillations of a signal (between 40 and 450 MHz) due to the optional function of the harmonic oscillation analyzer. Due to the fast-charge function, the DSO Oscilloscope Scopix OX7062 is ready to operate after 2 hours of charging and can be used during 4 hours. If you have any questions regarding the DSO Oscilloscope Scopix OX7062, please take a look at the following technical specifications or contact us: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our technicians and engineers will gladly advise you on all oscilloscopes and all products in the field of regulation and control, measuring instruments and scales.

- RS-232, centronics, Ethernet and USB
  interface
- 60 MHz frequency range
- Recorder (optional)
- Sampling rate per channel: ETS 100 GS/s
  Single Shot 2.5 GS/s
- MATH function
- RS-232/centronics/Ethernet/USB/micro
  SD memory card
- True RMS multimeter until 200 kHz

- 5.7” coloured LCD with touch panel
- FFT analyser (optional)
- Harmonics oscillations analyser
- Memory depth 2500 points per channel
- 12 bit DA converter
- Automatic “plug-and-play” recognizing of
  sensor and adapters
- NiMH accumulators for up to 4 hours operation

Technical Specification DSO Oscilloscope Scopix OX7204

Oscilloscope - mode

Bandwidth

60 MHz
frequency range limiter
5 kHz

Display 

11.5 x 8.6 cm, 5.7” TFT-colour-LCD display with touch panel (320 x 240 pixels)

Channels

2 (separate galvanic)

X distraction

Time basis

1 ns – 200 s/div; accuracy ± 0.1 %

Y distraction

Sensitivity

2.5 mV … 200 V/div; accuracy ± 1 %

Triggering

Trigger types

AUTO, TRIG, Single Shot, Auto level 50 %

Trigger modes

side, pulse width (20 ns – 20 s), delay (120 ns - 20 s), event counting (3 until 16,384), TV image or line (NTSC:525 or PAL:625) - any setting of trigger position

Digital memory

Maximum sampling rate

100 GS/s in ETS – 2.5 GS/s in Single Shot (in every channel) – 12 bit A/D transformer (Y resolution 0.025 %)

Memory depth

2500 points/channel (until 50,000 points
expandable)

User memory

2 MB + micro SD card

Display types

glitch mode 2 ns, envelope curve, average value, X/Y presentation

Further functions

FFT analysis & MATH functions 

FFT (lin or log) with measuring cursors -
basic arithmetic operations +, -, x,/and
mathematical formula editor

Cursors 

2 or 3 cursors: V and T simultaneously or phase - resolution 12 bit, four digit display

Automatic measurement 

19 time or lever measurements, phase measurement, -resolution 12 bit, 4 digit display

Multimeter mode

General data 

8000 digit + MIN/MAX bar graph – TRMS -
graphical memory with date/time

AC-, DC-, AC+DC voltage

600 mv … 600 V TRMS, 800 VDC – accuracy VDC 0.5 % + 5 dig – bandwidth 200 kHz

Error detection and measurement window error 

error duration adjustable – memory from up to 100 mistakes with date/time in .txt file

Resistance 

80 Ohm until 32 MOhm – accuracy 0.5 % display + 25 D

Further measurement types 

temperature, capacity (5 nF … 5 mF), frequency
(0 … 200 kHz), diode test 3.3 V

Harmonic analyser mode (optional)

Multi-channel analysis 

until 61. order – fundamental frequency of 40 … 450 Hz, automatic or manual

Simultaneous measurements (voltage/electricity) 

RMS value, THD and selected order (% 
fundamental wave, phase, frequency, 
RMS value)

Performance (single-phase and symmetric three-phase network) 

harmonics analysis in the apparent power, with 
presentation <recorded/delivered> for every order

Recorder mode

Duration – sampling rate interval 

from 2 s to 1 month
from 800 µs to 18 m
from 40 µs to 53 s
(with memory expansion)

Conditions of memory 

threshold value or tolerance window, simultaneous conditions in several channels, duration adjustable from 160 s

Recording analysis 

scale and unit of measurement, automatic or cursor measurements, error detection with date/time, zoom, etc.

General Technical Specification

Print 

via Ethernet, RS-232 or Centronics (optional)

Network connection 

Ethernet

Power supply

98 … 264 V/47 … 63 Hz, 15 W; NiMH accumulators

Electrical security/EMV 

electrical security according to IEC 61010-1 (2001) - EMV according to EN 61326-1 – 600 V, CAT III

Mechanical Data 

dimension 265 x 195 x 56 mm, - 1.9 kg with
accumulators – protection class IP41

Delivery content:

1 x DSO Oscilloscope Scopix OX7062
1 x power supply/charger, NiMH-accumulator 9.6 V – 3.8 Ah
1 x probe Probix 1/10
1 x adapter BNC/Probix
1 x adapter banana-Probix Ø 4 mm
1 x Ethernet cable (crossed)
1 x USB cable
1 x magnetic pen
1 x micro SD card
1 x hand strap
1 x User manual and programmer guide on CD-ROM

Equipment – software

PCE-HX0028 
PCE-HX0029 
PCE-HX0075 
PCE-HX0077 

option “harmonics analyser
option “recorder”
option “performance measurement”
option “memory extension”

Equipment – Probix

PCE-HX0030A
PCE-HX0031
PCE-HX0032 
PCE-HX0033 
PCE-HX0034 

Probix probe 1:10; 250 MHz
Probix adapter BNC; 250 MHz
Probix adapter BNC; 50 – 250 MHz
Probix adapter banana
clip-on current transformer 20 mV/A, 80 A top,
AC/DC, 1 MHz

PCE-HX0035 

PCE-HX0036 
PCE-HX0071 
PCE-HX0072 

adapter for K-thermo element, -40 °C to +1250°C
adapter for Pt100, -100 °C until +500 °C
accessory set for Probix probe for HX0030A
flexible current transformer AmpFLEX/Probix, 5 A until 3500 A – 200 kHz

PCE-HX0073 

flexible current transformer AmpFLEX/Probix, 5 A until 350 A – 3 MHz

PCE-HX0039 
PCE-HX0040 
PCE-HX0041 
PCE-HX0042 
PCE-HX0055 
PCE-P01101815 
PCE-SX-METRO/P 
PCE-HX0084 

Ethernet connection cable RJ45 (straight)
Ethernet connection cable RJ45 (crossed)
adapter RS-232/Centronics
RS-232 connection cable, SUBD 9 pin
adapter USB master/RS-232
adapter DB9M/DB25M
data processing software
USB cable

PCE-HX0038 
PCE-HX0057 
PCE-HX0061 

PCE-HX0063 

transportation case
equipped transportation case for Scopix
connection cable for vehicle board network
10 to 60 VDC
additional accumulator and power supply

Here you can find further oscilloscopes regarding the DSO Scopix series:

- DSO Scopix OX7042 series Oscilloscopes 
  (DSO oscilloscopes with multimeter function, bandwidth 40 MHz, 2 channels) 

- DSO Scopix OX7102 series Oscilloscopes 
  (DSO oscilloscopes with multimeter function, bandwidth 100 MHz, 2 channels)

- DSO Scopix OX7202 series Oscilloscopes 
  (DSO oscilloscopes with multimeter function, bandwidth 200 MHz, 2 channels)

- DSO Scopix OX7104 series Oscilloscopes 
  (DSO oscilloscopes with multimeter function, bandwidth 100 MHz, 4 channels)

Here you can find further products regarding the DSO Oscilloscope series: 

- PCE-DSO1060 series Oscilloscopes 
  (oscilloscopes with multimeter function, bandwidth 60 MHz, Automatic Trigger)

- PCE-DSO1200 series Oscilloscopes 
  (oscilloscopes with bandwidth 200 MHz and 500 MSamples/s, big screen, function multimeter)

- PCE-DSO8060 series Oscilloscopes 
  (handheld oscilloscopes with multimeter function, bandwidth 60 MHz, 2 channel)

The following product links will show you additional items regarding "portable oscilloscope":

- PCE-UT 81B series Oscilloscopes
  (handheld oscilloscopes (8 MHz), multimeters, frequency counter, USB port/internal storage)

- PKT-1220 series Oscilloscopes 
  (1 channel oscilloscopes with multimeter, 20 MHz widthband, USB interface)

- PKT-1205 series Oscilloscopes 
  (oscilloscopes with integrated multimeter, 20 MHz widthband, 2 channels, USB interface) 

- PKT-1195 series Oscilloscopes 
  (oscilloscopes with integrated multimeter, 2 channels, 100 MHz widthband, USB interface)

Here you will find an overview of all the measuring instruments available at PCE Instruments.

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714