Analytical Balances
We have analytical balances which come with software and are able to weight with an accuracy of 0.01 mg (more accurate devices are available upon request). Some analytical balances can be verified and have a plastic windscreen and an optional test weight. The interface allows data to be transferred from the analytical balances to a computer. Further analysis can be done using the optional software kit. Analytical balances have multiple functions:
  - Automatic internal weight adjustment, piece count, ISO GLP protocol, determination of percentage, RS-232
    interface.
  - Powered by mains adaptor, software kit is optional.
Analytical balances come with various additional components and ISO calibration certificates. Our engineers will help you assess the balances you might need. Contact us: UK customers +44(0) 23 809 870 30 / US customers (561) 320-9162. Our engineers and technicians will be happy to assist you with the analytical balances, and of course, with the other products in the field of regulation and control, and measuring instruments. 

Technical specifications for our Analytical Balances can be found at the following links:

- PCE-BS series Analytical Balances
  (economical analytical balances with weight range up to 300, 3000 or 6000 g)

- PCE-HB series Analytical Balances
  (low cast analytical balances with weight range up to 200 g/0.001 g or 2000 g/0.01 g, RS-232/USB interface)

- PCE-HB-M series Analytical Balances
  (calibrated analytical balances with weight range up to 600 g, resolution 0.01 g, RS-232)

- PCE-BT series Analytical Balances
  (these analytical balances can be calibrated with weight range (200 g and 2000 g))

- PCE-PM...T series Analytical Balances
  (economic, verifiable analytical balances with weight range: 300 g ... 15 kg, verification value: 0.1 g ... 5 g, RS-232)

- PCE-LSM series Analytical Balances
  (verifiable analytical balances with weight ranges up to 200, 2000 or 6000 g)

- PCE-LSZ 200C series Analytical Balances
  (analytical balances for weighing paper and fabric, range from 0 up to 20,000 g/m², resolution of 0.1 g/m²)

- PCE-LS series Analytical Balances
  (verifiable analytical balances with internal calibration, graphic display, weight range up to 500 or 3000 g)

- PCE-ABZ 200C series Analytical Balances
  (analytical balances similar to the PCE-ABZ 100C series but with weight range from 0 up to 200 g)

- PCE-AB-C series Analytical Balances
  (verifiable analytical balances with resolution of 0.1 mg, internal calibration, weight range up to 200 g)

- PCE-AB series Analytical Balances  
  (verifiable analytical balances with internal calibration graphic display, 0.1 mg, RS-232 port)

Not all the previously mentioned balances can be used as classic analytical balances. We made such a selection of balances because they fit within the scope of analysis. Normally all analytical balances have a sensitivity of less than 0.1 mg. The result indicated in the document of analysis is the value of at least two results with a sufficient repeatability (factor r). Electronic analytical balances frequently have an enclosure which protects from oscillations due to the wind breath, calibration programmes and shock absorbers that can eliminate sudden movements. Our balances have all the fundamental prerequisites, depending on the model, and multiple components:

Analytical balances are frequently used in the industrial sector as well as in quality control or product development. These balances are also used in research and development, in clinics, technical colleges and universities, mainly in their laboratories. Analytical balances are high quality devices and are accurate with resolution of 0.1 mg. A good example is the PCE-AB series. The PCE-VXI 60/220 is a scale with a reading capacity of only 0.01mg. If you need balances with a resolution of 0.001 mg, you should consider that analytical balances with this resolution also notice evaporation of liquids. Furthermore, they have protection against wind breath and have a level to ensure they are portioned correctly.

In the following image you can see balances with an internal adjustment weight. This weight is used for making automatic adjustments to analytical balances. Adjustment is done automatically, for example every two hours or if temperature changes of ±1°C occur. This ensures a consistent high level of accuracy. Once the balances are turned on, they perform an internal check of all the functions which is initiated by an electronic component in the device and an adjustment is made by the internal adjustment weight. ISO certificate with calibration document or verification which meets DIN ISO 9000 can be ordered.

Verification: According to CE certifications, analytical balances should be verified in the following cases(as we have just stated, a verification can be done by an authorized verification office or by PCE Instruments):
   a) In commercial dealings when the price of the product is determined by weight.
   b) In the production of medicines in pharmacies, as well in the detailed analysis in medical laboratories and pharmaceuticals.
   c) For concrete fees, tariffs or official fines. Also for technical expertise in court cases.
   d) For the manufacture of packaging.
If you would like to get additional information about verifying analytical balances, or if you are not sure whether you need verification or not, contact the Verifications office for your country. Verification of analytical balances can be done when the device is ordered or it can be sent for periodic verifications. Once verified, the balances should not be recalibrated with a calibration weight.  The first verification is valid for two years but further verifications should be done annually.

If you wish to view or print a selection of analytical balances from our catalogue, click PDF symbol