Balances for Analysis
We have balances for analysis which come with software and are able to measure with an accuracy of 0.01 mg (more accurate devices are available upon request). Some balances for analysis can be verified and have a plastic windscreen and an optional test weight. The interface allows data to be transferred from the balances for analysis to a computer. Further analysis can be done using the optional software kit. Balances for analysis have multiple functions:
 - Automatic internal weight adjustment, piece count, ISO GLP protocol, determination of percentage,
   RS-232 interface.
 - Powered by mains adaptor, software kit is optional.
Balances for analysis come with various additional components and ISO calibration certificates. If you have any questions about balances for analysis, please see the following technical data or contact us: UK customers +44(0) 23 809 870 30 / US customers (561) 320-9162 . Our engineers and technicians will be happy to help you with the balances for analysis, and of course, with the other products in the field of regulation and control, and measuring instruments.

Technical specifications for our Balances for Analysis can be found at the following links:

- PCE-BS series Balances for Analysis
  (economical balances for analysis with weight range up to 300, 3000 or 6000 g)

- PCE-HB series Balances for Analysis
  (Low cost balances for analysis with weight range u up to 200 g/0.001 g or 2000 g/0.01 g, RS-232/USB interface)

- PCE-HB-M series Balances for Analysis
  (calibrated balances for analysis with weight range up to 600 g, resolution 0.01 g, RS-232)

- PCE-BT series Balances for Analysis
  (these balances for analysis can be calibrated with weight range (200 g and 2000 g))

- PCE-PM...T series Balances for Analysis
  (economic, verifiable balances for analysis with weight range from 300 g up to 15 kg, verification value : 0.1 g ... 5 g, RS-232)

- PCE-LSM series Balances for Analysis
  (verifiable balances for analysis with weight range up to 200, 2000 or 6000 g)

- PCE-LSZ 200C series Balances for Analysis
  (balances for analysis for weighing paper and fabric, with weight range from 0 up to 20,000 g/m² and resolution of 0.1 g/m²)

- PCE-LS series Balances for Analysis
  (verifiable balances for analysis with internal calibration, graphic display, weight range up to 500 or 3000 g, RS-232 port)

- PCE-ABZ 00C series Balances for Analysis
  (balances for analysis similar to the PCE-ABZ 100C but with weight range from 0 up to 200 g)

- PCE-AB-C series Balances for Analysis
  (verifiable balances for analysis with resolution of 0.1 mg, internal calibration, weight range up to 200 g)

- PCE-AB 100 series Balances for Analysis   
  (verifiable balances for analysis with internal calibration graphic display, 0.1 mg, RS-232 port)

- PCE-AB 200 series Balances for Analysis
  (verifiable balances for analysis with internal calibration graphic display, 0.1 mg, RS-232 port)

Below you will  find some ways of application of the balances for analysis:

Not all the previously mentioned balances can be used as classic balances for analysis. We made such a selection of balances because they fit within the scope of analysis. Normally all balances for analysis have a sensitivity of less than 0.1 mg. The result indicated in the document of analysis is the value of at least two results with a sufficient repeatability (factor r). Electronic balances for analysis frequently have an enclosure which can protect from oscillations due to wind breath, calibration programmes and shock absorbers that can eliminate sudden movements. Our balances have all the fundamental prerequisites, depending on the model, and multiple components:

                                                       
Software kit                                 Printer                              Density equipment                       Test weights

Balances for analysis are frequently used in the industrial sector as well as in quality control or product development. These balances are also used in research and development, in clinics, technical colleges and universities, mainly in their laboratories. Balances for analysis are high quality devices and are accurate with resolutions of 0.1 mg. A good example is PCE-AB series. PCE-VXI 60/220 is a scale with a reading capacity of only 0.01mg. If you need balances with a resolution of 0.001 mg, you should consider that analytical balances with this resolution also notice evaporation of liquids. Furthermore, they have protection against wind breath and have a level to ensure that they are portioned correctly.

In the following image you can see balances with an internal adjustment weight. This weight is used for making automatic adjustments to balances for analysis. The adjustment is done automatically,  for example every two hours or if a temperature changes of ±1°C occur. This ensures consistant high level of accuracy. Once the balances are turned on, they perform an internal check of all the functions which is initiated by an electronic component in the device and an adjustment is made by the internal adjustment weight. ISO certificate with calibration document or verification which meets DIN ISO 9000 can be ordered.

If you wish to view or print a selection of balances for analysis from our catalogue, click PDF symbol

You are currently at: Home/measuring instruments and test equipment/balances/Balances for Analysis

If you have any questions, call our offices on:
UK customers +44(0) 23 809 870 30
US customers (561) 320-9162