In the general index you will find package balances for professional mailing/shipping. With the help of the package balances it will take you just a few seconds to calculate the weight of the object that is going to be sent. Package balances can be used for a wide range of purposes. On our web page you will find light package balances provided with plastic cases or heavy stainless steel package balances. Some package balances can be powered by external batteries to get more mobility. The demand for the package balances with weighing range from 30 to 60 kg is the highest among the customers. Some models with RS- 232  interface have optional software to allow the data on the display to be printed or stored data to be transferred to a computer. This function makes your job easier. If necessary, the data can be sent to other calculation programs such as MS Excel. If you don't find the package balances you are looking for, please contact us and we will help you to find the best solution to satisfy your needs. Call our offices UK customers +44(0) 23 809 870 30 / US customers (561) 320-9162 and our technical staff will give you an advice concerning our balances. Our engineers and technicians will be happy to help you when it goes not only about the package balances, but also about the other products in the field of regulation and control, and measuring instruments.

Technical specifications of our Package Balances can be found at the following links.

- PCE-BS series Package Balances
  (low-cost package balances, multifunctional, weighing ranges of 300, 3,000 or 6,000 g)

- PCE-PM...T series Package Balances
  (economical, verifiable, weighing range: 300 g ... 15 kg, verification value : 0.1 g ... 5 g, RS-232)

- PCE-ESM series Package Balances 
  (package balances verified M III, weighing range up to 25 kg, 1 g resolution, front and rear display)

- PCE-EPS 40 series Package Balances
  (package balances up to 40 kg, readability of 10 g, battery power and network component)

- PCE-PB series Package Balances 
  (low-cost package balances of 325 x 315 mm, they can weigh up to 60 kg or 150 kg)

- PCE-HPS 60 Package Balances
  (Economical package balances, weighing range up to 60 kg, rechargeable, RS-232)

- PCE-TS series Package Balances 
  (package balances with big display, ranges: 60 or 150 kg, RS-232, optional software)

- PCE-PM C series Package Balances
  (multifunctional package balances, weighing range up to 300 kg, resolution of 10 g)

- PCE-PS...XL series Package Balances
  (multifunctional package balances, weighing range up to 75 kg, RS-232, powered by an accumulator)

- Hook Package Balances  
  (weighing range up to 50 t, calibrated package balances, optional RS-232 interface, ...)

- Floor Package Balances    
  (weighing range up to 8 t, calibrated package balances, optional RS-232 interface, ...)

Many balances are used not only for packaging but also in the industrial sector. That is why almost all package balances have piece counting or percentage calculation functions (balances with percentage calculation function determine the variation in relation to the weight of the corresponding reference). Official calibration certificates (for calibrated postal balances) can be obtained on our web page. Below, there some examples of the professional use of our package balances.

Package balances are traditionally used in the industrial field. These digital balances work under the harshest environmental conditions without problems. They say that mechanical package balances are better for this field. Technical/electrical components of the digital package balances have been improved to make them ready for sudden movement, so some of our package balances come with a damping device. Most of the package balances have an interface available that can be connected to a computer or printer to make data protocols with the weights obtained. PCE-PM series package balances have an internal software to be connected to DHL, GLS and UPS software.
Verification: To correspond to the standard, all package balances must be verified when they are used for one of the following purposes:

- in trade relationships, when the price of the product is determined by its weight;

- to make medicines and formulations in pharmacy as well as detailed analysis in medical or pharmaceutical laboratories;

- for official activities such as determining rates or sanctions;

- for judicial expertise;

- for the production of packages.
If you require additional information about verification of package balances, or you are not sure whether you need a verified scale, you can contact your local authorized Verification Centre. Verification of package balances, only those that can be verified, can be done when balances are ordered or they can be sent for a periodical verification. Once an official verification has been done, package balances cannot be recalibrated by using an external calibration weight. The first verification is valid for two years, but each following validation is good for one year and must be done annually by the authorized verification centre.
 

If you wish to print a selection of package balances from our catalogue, click the PDF symbol:

You are currently at: Home / measuring instruments and test equipment / balances / Package Balances

If you have any questions, call our offices on:
UK customers +44(0) 23 809 870 30
US customers (561) 320-9162