 |
|
- Contact
us Other instruments: - Measures
-
Scales |
 |
|
PCE-LTS20 / PCE-FTS50 / PCE-MTS500
Test Position |
|
|
These test positions are used in combination with PCE series force meters. The offer the ideal solution for measuring traction and compression. Using the test position guarantees a precise correspondence between the test matrix and the test position. This allows for results to be accurately reproduced. The maximum range of traction or compression that can be used with these test positions is 509kg (depending on the model). It is operated by way of a lever or motor (with adjustable velocity). Often these test positions are used to test materials for other purposes. An overview of force meters can be found here. |
|
| PCE-LTS20 test position - MAximum usable length: 345mm - Total length: 530mm (without hand wheel) - Hand wheel diameter: 120mm - Length of base: 250mm - Width of base: 230mm - Base plate: 145 x 100mm - Approx. weight: 7kg - Maximum range of force: 1,000N - with adjustable screws You can adjust the following devices to attach to this test position (with corresponding mounting plate): - PCE-FM1000 - PCE-PCE-PTR |
|
|
|
PCE-FTS50 test position - Measurement of digital length - Maximum usable length: 335mm - Total length: 540mm (without hand wheel) - Hand wheel diameter: 120mm - Base plate: 210 x 128mm - Approx. weight: 8.8kg - Maximum range of force: 500N - ships without force meter You can adjust the following devices to attach to this test position (with corresponding mounting plate): - PCE-FM 50 / 200 - PCE-SH series (only with internal cell dynamometer) - PCE-PTR 200 |
| PCE-MTS500 test position - Powered by motor - Maximum vertical lift of 300mm (depending on the fixed adaptor or the vertical rail the corresponding force will be reduced) - Velocity of 30 to 300 mm/min. (adjustable) - Mode of operation: automatic or by pressing a key - Power: 230V /50 Hz - Total dimensions: 1020 x 400 x 260mm - Adjustable automatic disconnect - Approx. weight: 60kg - Maximum range of force: 5,000N You can adjust the following devices to attach to this test position (with corresponding mounting plate): - PCE-FM series - PCE-SH series (internal cell dynamometer) - PCE-SH 2K (external cell dynamometer) |
|
| Optional accessories - wedge handholds, adaptor, hook and eyelets |
|
|
|
|
| Here you will find all the measuring instruments available at PCE Instruments. | |
|
Contact: |
Contact: |
|
Below you will find an overview of the different product groups of measuring instruments |
|||||||||||||||||||||||||
|
|
|
|
||||||||||||||||||||||