Caliper PCE-DCP 1000
  large display with six digits / fine tuning with clamping screw /
a high quality carrying case is included in the delivery

The caliper can be adjusted to take absolute or incremental measurements (relative measurements). The change ABS/INC can be carried out by the caliper PCE-DCP in any position. Mm or inch can also be selected and the measuring method can be chosen (ABS or INC) in any position. With the caliper PCE-DCP 1000 and absolute measuring method, you will not need to check zero position before measuring due to the fact that the measuring position is registered in the caliper. Due to its fine tuning with additional clamping screw the caliper PCE-DCP 1000 can be used very easily even when a big object is being measured. Additionally the caliper PCE-DCP 1000 can be adjusted to a tolerance limit. High processing speed and measurement system insensitive to electromagnetic interference guarantees a measurement without any error. At the following link you will find the caliper you are looking for as well as the thickness meter you need. 

     - Large display

     - Fine tuning

     - Long sliding end

     - With additional clamping screw

     - Display with six digits

     - Change from mm to inch

Technical specifications:

 Measurement range

 Resolution

 Accuracy

 Display

 Spigot length

 Spigot thickness

 Power

Delivery content:
1 x Caliper PCE-DCP 1000, 1x battery, 1 x wooden carrying case

The Caliper PCE-DCP 1000 adjusting a woodworking machine.

The Caliper PCE-DCP 1000 checking transverse in containers for newspapers.

Here you will see the caliper with its high quality wooden carrying case.

This image shows the caliper while measuring an exhauster fan.

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments