|
|
LAN
Network Testers
LAN testers cover the fields of installation and network
control. These LAN tester can be used in the  workLAN
Network Tester and are ideal for technical service professionals and network
administrators. These LAN testers can determine IP addresses, identify polarity,
connected port and link connectivity. Furthermore, they can test fibre optic
cables. It can also show cable break points, incorrect connections in fibre
optic lines. All this in a large pen design. With these LAN testers you can test
the state of LAN network connections to Hubs and Switches and can analyse the
traffic of a network and which IP it generates. If you can't find the LAN tester
you are looking for, please contact us and we will help you find the best
solution to suit your needs by calling our offices on:  UK customers +44(0) 23 809 870 30 / US customers (561) 320-9162 and
our technical staff will advise you regarding our products.
Here you
can see insulation meters from these companies:
 
Technical specifications for LAN Tester can be found at the following links:
|
|
- CableTracker PCE-LT 1 LAN Tester
(LAN tester for quickly testing network connections)
|
 |
|
- CableTracker PCE-180CB LAN Tester 
(LAN tester to network identification and data ports and cables)
|
 |
|
- CableTracker PCE-VFL LAN Tester
(LAN tester for the detection of breaks soft spots and excessive bending radius)
|
 |
|
- LM-26 series LAN Tester
(LAN tester for identifies signals RJ45 plugs / voltage check)
|
 |
|
- Pinger series LAN Tester
(Professional LAN tester for network installation and inspection)
|
 |
|
- CableTool series LAN Tester
(LAN tester to measure cable length, to max. 700 m / voltage check)
|
 |
|
- LanExpert series LAN Tester
(LAN tester for monitoring and maintenance of network)
|
 |
|
- Wirexpert series LAN Tester
(LAN tester for measurement and certification of all parameters of the network - copper / fiber)
|
 |
To maintain the devices accuracy it needs to be calibrated regularly, however this will depend on various factors which are listed below: |
-
Performance of the measuring instruments
-
Frequency of use
-
Operating conditions
-
Stability of previous calibrations
-
Required measurement accuracy
-
Determining factors of the quality control systems used by companies
This means that the same user should check and control the interval between calibrations. We recommend that this interval between calibrations should be between 1 and 3 years. We can also offer our expert advice to resolve any questions relating to the process of establishing a calibration interval.
Take into consideration:
When a LAN tester CableTracker PCE-LT 1 is calibrated, this should be done while the temperature sensor being used with the device is attached or with the sensor that came with the LAN tester attached. The accuracy of the calibration depends on the device and the sensor combined. In the case of the CableTracker PCE-LT 1 series LAN tester.
If you wish to view or print a selection of the LAN tester available in our catalogue, click the PDF symbol.
|
