|
Caliper - PCE DCP 200N caliper for easy use / changes from inch to mm / with clampling screw |
|||
The caliper has two tips for indoor and outdoor measurements. In addition the caliper has a rod to measure in depths, such as drilling. The caliper has a table on its rear part where you will be able to read the diameters of the holes in relation to threads. If you have questions about the caliper, see data sheet below or contact us: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our technicians and engineers will be happy to advise you on this caliper and on any product of our control systems, meters or scales. |
|||
- Stainless Steel |
- With clamping screw - Threads indication table - Easy to use |
||
Technical specifications: |
|||
Measurement range |
0 ...200 mm |
||
Resolution |
0.01 mm |
||
Accuracy |
± 0.03 mm |
||
Display |
LCD Display |
||
Measurement system |
lineal, non-contact CAP measurement system |
||
Measuring speed |
max. 1.5 m/s |
||
Caliper length |
approx. 290 mm |
||
Spigot length |
approx. 50 mm |
||
Spigot heigh |
approx. 16 mm |
||
Spigot thickness |
approx. 4 mm |
||
Power |
1.5 V SR44 |
||
Environmental temperature |
0 ... +40 °C |
||
Storage temperature |
-20 ... +70 °C |
||
Delivery contents |
|||
Images of use |
|||
|
|
||
Here you will find an overview of all the measuring instruments available at PCE Instruments. | |||
Contact: |
Contact: |
Below you will find an overview of the different product groups of measuring instruments |
||||||||||||||||||||||||
|
|
|
|