Device Tester Safetytest 3S
Device tester according to BGV A3/ Connections for 3-phase and single-phase test objects/ including clamp-on ammeter to measure leakage current/ with functioning tests/ 
Inspection of extension wires/ Automatic inspection procedure

The compact device tester safetytest 3S is customized for 3-phase and single-phase test objects. Inspections after repairs or a repeating test can be performed with the device tester safetytest 3S. The device teste safetytest 3S is equipped with all standard sockets for consumers of alternating and rotary current. In order to check even extension wires via the device tester safetytest 3S safely and easily, there are connectors installed across from the sockets. The keypad integrated in the enclosure as well as the internal clock and an internal storage allows performing measurements comfortably via the device tester without even needing a computer. The electric supply is provided via a 32A-CEE-socket. Various protection facilities at the device tester secure a safe operation. The device tester safetytest 3S enables every inspection instructed by the VDE 0701/0702. Besides passive measurements this device tester even supports active measurements. Thanks to a graphic LC display the menu driven operation is relatively uncomplicated. Our engineers and technicians will gladly help you with the Device Tester Safetytest 3S or any other product in the field of regulation and control or scales and balances of PCE Instruments.

- Real time clock
- storage for more than 800 inspections
- Exhibits all standard sockets
- Operational inspection
- performance indication

- Barcode reader connection
- Inspection according to DIN VDE 0701-0702
- Inspection of electric supply
- Test of devices with termination 
- Operator guidance for clear text instruction

Technical data

Electric supply

Rotary current with neutral line or alternating current
400/230 V AC ± 10 %

Switching capacity

integrated contactor: 40 A

Operating and surrounding temperature

0 ... +40 °C

Operating failure

1 % from range + 5 % from measuring value

Test object connection

32 A - CEE 5-pole
16 A - CEE 5-pole
16 A - CEE 3-pole
Schuko
Rubber connector

Protective conductor resistance R-PE

       Range

0,000 ... 4,000 Ω

       Measuring conditions

U0 = 6 VDC, IK  200 mA

Insulation resistance R-SO

       Range

0,00 ... 20,00 MΩ

       Measuring conditions

UN: 500 V, 1000 V DC; IK  1 mA

Substitutable leakage current I-EA

       Range

0,00 ... 20,00 mA

       Measuring conditions

U0: 150 VAC

Differential current I-diff

       Range

0,00 ... 20,00 mA

       Measuring conditions

Filter characteristic according to DIN VDE 0404 for correct evaluation of harmonic waves

Contact current I-ABL

       Range

0,000 ... 4,000 mA

Voltage per phase

0,0 ... 260,0 V

Current per phase

0,00 ... 40,00 A

Total performance

0 ... 40000 W Capture up to 15th harmonic

Rotary field recognition

AC, right, error

Protection wire monitoring

Voltage: N-PE >30 V

Integrated error current switch-off:

Differential current > approx. 20 mA

Inspection procedures

Regulation: DIN VDE 0701-0702
SKI active/passive (with or without electrical network)
SKII
termination
extension line
single measurement

Interfaces:

RS232 

Storage, clock:

ca. 8000 approx. 8000 measuring protocols for max. 32 customers with date and time stamp

Dimensions

380 x 300 x 220 mm

Weight

approx. 7 kg

Delivery content: 
1 x device tester safetytest 3S, 1 x sensor measuring line, 1 x differential current clamp, 
1 x instruction manual

-Without connection cable!- Please order separately!-

Additional equipment:

- Connection cable CEE-32 A
- Connection cable CEE-16 A
- Connection cable Schuko socket
- ISO calibration certificate
- Inspection clamp 4mm black
- Brush sensor 4mm black for effective protection line measuring
- Barcode scanner
- Barcode printer
- Software Safetydoc
- Software Safety- Remote

If trainings about measuring according to VDE 0701/0702 are demanded, please contact us!

In order to guarantee even untrained inspectors a preferably safe inspection, clear text instructions are displayed at the LC display and measuring and threshold values are given. Afterwards a good/bad decision is to be made.

Here you can see similar products to the topic: "Device-Tester":

- Device-Tester 2775
  (to test devices according the Norm 0701/ 0702)

- Device-Tester 2765
  (additionally to test medical devices according to VDE Norm 0571)

- Device-Tester Safetytest 1L
  (gauge to test the electrical security according to VDE 0701/0702)

- Device-Tester Safetytest 1N
  (quick test according to VDE 0701/0702, intern protocol-memory up to 16000 protocols)

- Device-Tester Secutest S2N+ 
  (device according to VDE-Norm 0701 / 702 and VDE-Norm 0751 für electro-medical devices)

- Device-Tester Metratester 5-3P
  (gauge for measurements of devices according to DIN VDE 0701 und 0702)

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments