VIS 200 / 250 Endoscope
Endoscope with 7'' monitor / battery operation or mains supply / 
camera head Ø 26 mm with 12 bright LEDs / 
VIS 250 Endoscope with SD memory card data transfer via Mini USB

The VIS 200 / 250 Endoscope serves for the simple analysis of weak spots in wastewater pipes, as well as the maintenance of downpipes and exhaust gas lines. The endoscope can either be battery-operated or supplied by mains-adaptor. The equipment is delivered in a hard case, compact and impresses with its easy handling as well as its quick readiness. The VIS 200 Endoscope measures lengths due to a push rod with length marking, whereas the VIS 250 Endoscope supports electric meter count. Furthermore, the VIS 250 Endoscope can record and document the complete inspection process thanks to its integrated storage. Both instruments possess a water-resistant camera head which is equipped with 12 bright LEDs. Optical analysis of tubes and shafts has never been as easy as with the VIS 200 / 250 Endoscope, which does not even have a problem with bows in pipes with a diameter of only 40 mm. The VIS 250 Endoscope does also possess an option to display where the top and the bottom of the camera head is situated and how many degrees the camera head is lowered or lifted. In addition to that, the VIS 250 Endoscope can equipped with the Locator L 200, which makes it easier to locate damaged spots. The Locator L 200 is able to spot the camera head from above the ground by measuring the long radio waves which are sent from the camera head, while the endoscope produces both visual and acoustic signals. Those signals help the user to find the affected pipe section. The TFT monitor of the endoscope is swivelling and can even be removed from the hard case (cable length of 2 m) in case that a place is difficult to access. In case that you should have more questions regarding the VIS 300 /350 Endoscope, please read the following technical data, use our contact form or call us: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our technicians and engineers will gladly advise you regarding the endoscope or all other products in the field of Control Systems, Laboratory Equipment, Measuring Instruments or Scales and Balances of PCE Instruments Ltd.

- camera head of Ø 26 mm
- water-resistant camera head
- light sensitivity of 0.5 lux
- 7 " TFT monitor

- push rod of 20 m length
- battery operation up to 4 h
- 12 bright LEDs
- memory card for VIS 250

Technical specifications of the VIS 200 / 250 Endoscope

Display

Dimensions of the case

176 x 114 x 32 mm

Display

7 '' / 16:9 Format

Output / Video Out

Weight

400 g

Power supply

Operation time

each battery 120 min = 4 h

Camera head Ø 26 mm

Miniature camera head

type: 1/3 " COLOUR CMOS

Resolution

420 digit

Pixel

768 x 576 (PAL), 656 x 492 (NTSC)

Light sensitivity

0.5 lux

Lens

f = 2,3 mm, F = 2,5

Angle of image sensing

115 °

Light source

12 white LEDs

Protection

IP 68 (water-resistant)

Dimensions

Ø 26 x 38 mm

Weight

240 g

Operating temperature

0 ... +40 °C, RH 95 % MAX

Storage temperature

-20 ... +50 °C, RH 95 % MAX

Locator transmitter

Transmit frequency

8,9 kHz

Hard Case

Dimensions

51 x 43 x 17 cm

Weight

7 kg

Locator receiver

Display

Graphic visualisation

Output impedance

Headphones

Type 32 Ohm

Power supply

3,7 V Li Ion Akku

Working temperature

0 ... +40 °C

Storage temperature

-10 ... +40 °C

Weight

605 g

Dimensions

32 x 14 x 7 cm

Length measurement VIS 200 / 250

VIS 200 Endoscope 

Push rod with length marking

Length 

20 m

Diameter

Ø 6 mm

VIS 250 Endoscope

Electronic meter count

Resolution

0,04 m

Storage (only VIS 250 Endoscope)

Recording

2 GB SD memory card (2,5 h recording)

Interface

Mini-USB

Applications of the VIS 200 / 250 Endoscope

Here you can see the application of the
VIS 200 / 250 Endoscope in a kitchen 

The VIS 200 / 250 Endoscope possesses a camera head with 12 bright LEDs

Delivery content of the VIS 200 Endoscope

1 x VIS 200, 1 x camera head (Ø 26 mm), 1 x TFT monitor, 1 x 2 m connection cable for monitor, 
1 x 20 m push rod (Ø 6 mm), 1 x anit-slip mat, 1 x NiMH battery, 1 x charger

Delivery content of the VIS 250 Endoscope

1 x VIS 250 with video storage and electronic meter count, 1 x camera head (Ø 26 mm), 
1 x SD memory card 2 GB, 1 x Mini-USB cable, 1 x TFT monitor, 1 x 2 m connection cable for monitor, 1 x anit-slip mat, 1 x NiMH battery, 1 x charger

Optional accessories of the VIS 200 / 250 Endoscope

L 200 Locator Receiver


for the location of the radio signals, the endoscope camera head is sending

Guide Set 70

for miniature camera head Ø 26 mm of the endoscope; for the conduction with GFK camera rod 70 ... 200 mm; can be customized for different diameters

Centering Sleeve with object protection

for miniature camera head Ø  26 mm; protects the camera head and the lens of the endoscope

Roller Guide

for camera heads and bars of the VIS 200 / 250 Endoscope

Stabilisation Ball Ø  30 x 27 mm

for GFK camera bars Ø  6; 6,5; 7 mm and miniature camera heads of the endoscope

In-Car Charger for the VIS 300 / 350 Endoscope

Charging with 18 V

Here you will find an overview of all the measuring instruments available at PCE Instruments.

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments