Indentation Hardness Tester MICRO IRHD SYSTEM
 Indentation Hardness Tester according to IRHD on samples out of rubber/plastic / 
Accuracy 0.1 IRHD / Norms: DIN ISO 48, ISO 48. ASTM D 1415, BS 903: Part A26

The Indentation Hardness Tester MICRO IRHD SYSTEM provides the indentation hardness after MICRO readings on samples of rubber and plastics. The recommended sample thickness for use of Indentation Hardness Tester is 1 ... 5 mm. International standards such as ISO 48 and ISO 48 are satisfied by the Indentation Hardness Tester. The MICRO IRHD SYSTEM is, controlled by extensive MS-Windows software, hardness testing machine. The two weights are lowered by the motorized Indentation Hardness Tester and lifted. That's why an operator error is excluded. To test the hardness the samples simply be placed on the test bench. The table automatically drives to the sensor from the Indentation Hardness Tester. The initial force is automatically reduced to the indenter. This position of the indenter represents 100 MICRO IRHD. The major force is automatically reduced by the Indentation Hardness Tester. The penetration of the indenter is measured digitally in 30 seconds and automatically in MICRO IRHD values converted. The MICRO IRHD software by Indentation Hardness Tester checks and controls the operation of the system. The software works with MS-Windows software and provides the user with a variety of benefits. The hardness value, graph, hysteresis, statistics, test report etc. are some important and useful features of this software. All data is transferred to the controller IRHD and via RS-232 interface passed to the PC. So you can check your measurements after calmly, analyze and evaluate. For further information about the Indentation Hardness Tester, please read the following technical data or call our Hotline: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. You can also reach us through our contact form. Our engineers and technicians will gladly advise you regarding the Indentation Hardness Tester or any product in the terms of regulation and control, scales and balances of PCE Instruments.

- MS Windows controlled
- Automatic measurement
- Sturdy construction
- Hardness testing of rubber and plastics

- RS-232 interface
- Software included
- Measurement in 30 seconds
- Including dust cover

Technical specification of Indentation Hardness Tester IRHD

measuring unit

Ø 200 mm x 470 mm

controller

290 mm x 260 mm x 75 mm

netto Weight

17.5 kg

Maximum sample thickness

90 mm

resolution

0.1 IRHD

standardize

DIN ISO 48
ISO 48
ASTM D 1415
BS 903: Part A26

Delivery Content

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments