Optical tachometer PCE-DT62
tachometer for optically measuring rotations without contact or for optically
calculating using sum function, with objective laser for optimal visualization

The PCE-DT62 tachometer is ideal to determine the rotations of components in installations and machinery, such as conveyor belts, motors or mechanisms, that can measure velocity optically. Non-contact measurements of the tachometer are taken by using a piece of reflective tape that is stuck to the rotating component. The reflective tape is not always required. If the conditions allow for it, and there is a short distance of less than 30cm between the tachometer and the object being measured, then there is no need to use the reflective tape. The tachometer has a button to select the mode of measurement of either RPMs or piece count (TOT). The tachometer can also record Maximum and minimum values as well as current value. The tachometer comes ready to use and includes a carrying case and a set of batteries.
Here you will be able to find the tachometer you are looking for with the same technical characteristics, but without an interface or software to transfer data to a computer. Here in this link you can find an overview of any type of tachometer that you may need.

• Red laser to more optimally visualize the object.

• The tachometer measures optically without contact  using reflective strips of tape which come included, although tape is not required at short distances.

• Solid enclosure made of ABS plastic.

• Memory for current value and MIN / MAX value

• optional ISO calibration certificate

PCE-DT62 optical tachometer

The tachometer is used as followed:
the laser is pointed at the reflected tape which is situated on the blade of a fan, allowing for the measurement to be made quickly and accurately.

Please follow the correct method of using the PCE-DT62
tachometer when making an optical measurement.

±0.05% of reading ±1 digit

Contents
PCE-DT62 tachometer,
1 x 9V battery,
5 strips of reflective tape (15cm long each),
carrying case and user's manual

Optional accessories
- Roll of reflective tape (5m)

- ISO laboratory calibration with certificate
For companies that wish to include the device in thier group of internal tools or for annual recalibrations (in cases when the calibrator is not used). The ISO calibration includes a laboratory calibration and a document with all the measurement values and details of the owner of the device.

Here you will find an overview of all the measuring instruments available at PCE Instruments.

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone. +44 ( 0 ) 2380 98703 0
Fax +44 ( 0 ) 2380 98703 0

Below you will find an overview of the different product groups of measuring instruments