Pedal Power Meter PKH 2.0
Pedal power meter for force power measurement of brake pedals of lorries and cars / measurement range of 0 N … 1500 N / mechanic overload protection

This pedal power meter is especially developed for inspection of vehicles. The pedal power meter of series PKH 2.0 was especially developed for force power measurement of lorries and cars and therefore forces are measured that react to brake pedal and handbrake. During measurement our pedal power meter will be fastened merely to brake pedal via clamping bracket or via a belt at handbrake. There exist two opportunities to read out pedal power meter. On the one hand it is possible to output measurement values analogue. For this, there exists a recorder that is equipped with an integrated amplifier. On the other hand there is a combination of pedal power meter with a hand terminal that fits to pedal power meter PKH 2.0. During this measurement values can be directly read off the display of hand terminal. Moreover, measured maximum value can be retrieved via pushing the button. According to quality of hand terminal of pedal power meter PKH 2.0 the opportunity to connect a printer still exists. This can be a great advantage after measurement since an exact analysis can be made afterwards and test results can be put to archives to take them into advice for future measurements. Additionally, our pedal power meter stands out due to its compact construction and high stability. The pedal power meter PKH 2.0 is a calibrated device. Upon request, we can calibrate the device with a calibration laboratory. If there are any questions about the pedal power meter PKH 2.0 have a look at the technical specification below or call: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our technicians and engineers will gladly advise you in all power pedal meters and all products in the field of measuring instruments, regulation and control and scales.

- Measurement range from 0 N until 1,500 N
- For pressure forces
- Several readout options
- For lorries and cars

- Mechanic over load protection
- High accuracy
- Ideal for force measurement
- Possible to calibrate device

Technical specification 

Nominal load

0 … 1500 N

Accuracy class 

0.5 %

Protection type

IP 65

Dimensions (pedal power meter)

50 x 70 x 27 mm

Dimensions (hand terminal)

78 x 145 x 44 mm

LC display

12 digits, 2 lines

Supply

4x batteries type AA

Protection type

IP 40

Operating temperature

0 °C … + 50 °C

Casing

ABS

License

APK acceptance in the Netherlands

Delivery content
1x pedal power meter PKH 2.0 (0 N … 1000 N), 1x hand terminal HT 6.0, 1x user’s manual

Here you can find further similar products regarding 'pedal power meters':

- Pedal Power Meter SN series
  (Analogue pedal power meter for traction and compression measurements, with large-scale
   Display)

- Pedal Power Meter SKN series
  (Mechanical Design, for traction and compression measurements, robust metal housing)

- Pedal Power Meter PCE-FM series  
  (Pedal power meter up to 200N, accurate, economical)

- Pedal Power Meter PCE-FM1000  
  (Pedal power meter up to 1000N, external dynamometric cell)

- Pedal Power Meter PCE-FG K series 
  (Pedal power meter traction and compression, internal memory, external cell, 1.000...20.000 N)

- Pedal Power Meter PCE-FG series 
  (Pedal power meter for measuring traction and compression, 50, 200 and 500 N, PEAK function)

- Pedal Power Meter PCE-FG K series 
  (Pedal power meter traction and compression, internal memory, external cell, 1.000...20.000 N)

- Pedal Power Meter EF-AE series
  (Pedal power meter for compression with software and USB interface, maximum 50 kN)

- Pedal Power Meter EF-AE-S series
  (Pedal power meter for traction and and USB interface, maximum 50 kN)

- Pedal Power Meter TZL
  (Measures tension of forces up to 20,000 kg, long battery lifetime)

- Pedal Power Meter TZR series
  (With external display, rugged housing, max. 20 t, several measurement units: kg, tons, pounds,
  kN)

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments