Signal Converter: IAMA current / volatage
unit with 110 combinations (it transforms imput analog signals (0 ...10 V, 4 ... 20 mA, 0 ... 100 V ...) into standard analog signals  galvanically separated)

The signal converter transforms an analog input signal into a corresponding analog output signal. The signal converter´s input and output signals are completely separated by galvanic treatment. The setting of the input and output ranges in the signal converter is via a DIP switch. The 100 different combinations of input and output and the free selection of the tight ranges make this a signal converter device of universal use and easy to store. Since the input and output range can be set identically, the signal converter can be used to make a galvanic isolation. The signal converter simply slides along a track in C or cap. Here you can find another converter, IFMA, which transforms a frequency range (input signal) into a standard analog signal (output signal). This link provides an overview in which you can find different types of signal converters needed for different protocols.

- 110 combinations through DIP switch easily select

- Endless possibilities, that can be scaled freely

- In operation in less than 5 min.

- Transforms analog input signals (eg 0 ... 10 V, max. 100 V, max. 0 ... 100 mA) in standard analog

- Galvanized isolated

- Electrical isolation of signal input, output and power

- Supply: 9 ... 32 VDC, max 2.5 W.

View / print the user´s manual for the
IAMA signal converter

The signal converter graduates defining the input and output range through the introduction of the signal magnitudes desired.

0.006 % of the maximum input value
0.006 % of the maximum output value

for output range1 mA, 2 mA, 20 mV: +/- 0,2 % maximum value (all the other output ranges: +/- 0,1 % maximum value)

operating: - 25 ... + 75 °C
storage: - 40 ... + 85 °C / 85 % H. r. 
temperature coefficient: máx.+/- 0,01 % / °C

- disturbing emissions: EN50081-2
- disturbing resistance: EN50082-2

authorization UL (Underwriters Laboratories) for USA and Canada

Shipment content
1 x IAMA signal converter, user's manual

Here you will find all the measuring instruments available at PCE Instruments.

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone. +44 ( 0 ) 2380 98703 0
Fax +44 ( 0 ) 2380 98703 0

Below you will find an overview of the different product groups of measuring instruments