Temperature Data Logger Hobo U12-006

Temperature Data Logger Hobo U12-006 4 channels, external inputs, USB port
The handy temperature data logger Hobo U12-006 measures temperature values with 4 external channels. The inputs of the temperature data logger Hobo U12-006 are ideal for temperature sensors and cables, AC current, 0 ... 2.5 V DC and 4 ... 20 mA. The temperature data logger Hobo U12-006 works completely independently, this means that it needs no external power. The temperature data logger Hobo U12-006 offers additional protocol events; it protocols the activation key, the PC connection and the battery status. Thanks to its data memory EEPROM, the values are stored even if the battery fails. The temperature data logger Hobo U12-006 is programmed through the optional software, and it is also through this software that we read the measured values. The optional software is needed to activate and program the data logger.

- Memory: The unit can record a total of 43,000 readings (using 4 channels the values are divided into 10,750 measurement values per channel) - Measurement rate: adjustable from 1 second to 18 hours, measuring time up to 1 year - External sensors for temperature and humidity or temperature and electrical signals - No need of calibration - Start time and date can be programmed - EEPROM data memory: you do not lose data when the battery voltage fails. - Blinking LED indicates the function		Temperature Data Logger Hobo U12-006
Technical specifications
Memory	43,000 values
Data transfer	USB (complete downlad in 30 seconds)
Measurement rate	from 1 second up to 18 hours
Battery	replaceable lithium battery CR-2032 (one year of continuous working)
Environmental conditions	-20 ... +70 °C 5...95% R.H. (non condensed)
Dimensions	58 x 74 x 22 mm
Weight	46 g
Delivery content 1 x temperature data logger Hobo U12-006 (battery included), 1 x user´s manual
Optional components
Easy set up Selection of all parameters, including: the measurement channels that are activated. Measurement range. Immediate or delayed start, or start externally activated (Trigger button). Checking of the battery capacity Real time monitoring Numerical representation in real time on the computer. Data storage free of interruptions during transmission to the computer and during the verification of the state.
Temperature sensor Sensor cable with a length of 180 cm, the sensor is suitable for measurements of gases and water. However, it is not ideal for continuous use in the water. The continuous use in water below 30ºC should not exceed the maximum time of 3 months and up to 1 month with temperatures above 30 ° C.
Range		-40 ... +100 °C (in air)
Accuracy		from ±0.5 °C to 20 °C
Resolution		from 0.4 °C to 20 °C
Time of stabilisation in air		approx. 4.5 min (is static air)
Time of stabiisation in water		approx. 1 min (in water movement)
4...20 mA cable
Range		0 ... 20 mA
Accuracy		±0.1 mA ±1 % of measurement value
Resolution		0.4 % of final value
Length		45 cm with open ends
2.5 V cable 180 cm cable with open ends for direct connection to the temperature data logger U12-006, that is, for inputs 0 ... 2.5 V DC
10 V cable, 180 cm cable with open ends for direct connection with the temperature data logger U12-006. In case you needed to have a signal from 0...10V, this is reduced to 2.5V due to integrated voltage dividor. It is used in many different industry aplications.
Current sensors (note: not approved by EC) can be obtained on request for 0 ... 20 A, 0 ... 50 A, 0 ... 100 A, 0 ... 200 A and 0 ... 600 A. The accuracy is ± 2% of final value. Input signal: AC, 50 or 60 Hz

Here you will find an overview of all the measuring instruments available at PCE Instruments.
Contact: PCE Instruments UK Limited Unit 11 Southpoint Business Park Ensign Way, Southampton United Kingdom, SO31 4RF Phone: +44(0) 23 809 870 30 Fax: +44(0) 23 809 870 39	Contact: PCE Americas Inc. 1201 Jupiter Park Drive, Suite 8 Jupiter 33458 FL USA Phone: +1-410-387-7703 Fax: +1-410-387-7714