Two Channel Portable Oscilloscope PCE-SDS 10xx Series
Two channel portable oscilloscope with 7’’ TFT-Display / USB-Interface / RS232 connection / 12 integrated menu languages / 2 measuring channels + 1 trigger channel

The two channel portable oscilloscope PCE-SDS 10xx stands out due to its 7’’ widescreen Colour-TFT. Due to a maximum bandwidth of 50 MHz, the two channel portable oscilloscope PCE-SDS 10xx series covers a wide application range in electronics and metrology. Due to its enormous sampling rate of up to 1 GS/sec the two channel portable oscilloscope can analyse incoming signals very accurately. It also has a maximized sensitivity of 10 ns which allows even small the peaks to be captured in order to display them. The USB-interface at the front of the device enables signals from the monitor of the two channel portable oscilloscope to be stored directly onto an USB- memory stick. Via an integrated “auto”-button on the two channel portable oscilloscope PCE-SDS 10xx series, automatic settings for the current signal can be found and applied. The intuitively operable control panel of the two channel portable oscilloscope allows a quick and easy handling. Furthermore, the two channel portable oscilloscope offers broad arithmetic functions to interpret a signal, e.g. by a FFT-analysis. The low weight of the two channel portable oscilloscope even permits a mobile use. If you have any further questions regarding the two channel portable oscilloscope, take a look at the following technical specifications or contact us: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our technicians and engineers will gladly advise you on all oscilloscopes and all products in the field of regulation and control, measuring instruments and scales.

- up to 1 GS/s real-time sampling rate 
- maximum sensitivity: 10 ns
- 25/50 MHz bandwidth
- auto-measuring function
- 12 menu languages

- 2 measuring channels
- direct attachment of USB-stick
- RS232 interface
- 7’’ widescreen TFT display
- Security CAT II, 400 V

Technical Specification 

PCE-SDS 1022DL   

PCE-SDS 1052DL

Vertical part

Analogue bandwidth

25 MHz       

50 MHZ

Band width range limit

not existing  

20 MHz ± 40 %

Accuracy 

2 mV ~ 10 V/div

Resolution

8 Bit

Channels

2

Min. frequency limit

≤ 10 Hz

Arithmetic functions

summate, subtract, multiply, divide, FFT- analysis, interpolation: sin(x) / x

Horizontal part

Time base

1 ns ... 50 ns

Memory depth

32000 points

Sampling rate single-channel-measuring

1 GSa/s

Sampling rate 2-channel-measuring

500 MS/s

Inputs

input interface

AC, DC, GND

incoming impedance 

1 MΩ ± 2 % || 17 pF ± 3 pF

maximum voltage input

400 Vss (DC + AC), CAT I, CAT II

Probe proportion

1X, 10X, 100X, 1000X

Trigger

Trigger signal

flank, pulse width, video, random setting of trigger position

Trigger source

CH1, CH2, EXT

Trigger form

Auto, normal, single

Trigger linking

AC, DC, LF rej., HF rej

Gauge range

CH1 and CH2: ± 6 DIV from center of display, EXT: ± 1.2 V

Hold off

100 ns … 1.5 s

Hardware frequency counter

Resolution

6 Bytes

Frequency range

DC linking, 10 Hz ... F max

Signal types

all trigger signals (except for pulse width and video)

General data

Display

7" Colour –TFT

Resolution

480 x 234 pixel

Colour depth 

64000 colours

Environmental conditions

Operation: +10 °C ... +40 °C, max.85 % RH for 24 h
Stored: -20 °C ... +60 °C, max.85 % RH for 24 h

Voltage Supply

100 ... 240 V AC CAT II, 45 Hz ... 440 Hz

Power dissipation

50 VA max.

Dimensions

305 x 133 x 154 mm (L x W x H)

Weight

2.3 kg

Delivery Content:

1 x Two channel portable oscilloscope PCE-SDS 1022DL or PCE-SDS 1052DL, 2 x probes, 
1 x software, 1 x mains cable, 1 x instruction manual

Example of use

Here you can see the application of the two channel portable oscilloscope for fault analysis on a defect metal plate. 

Backside of two channel portable oscilloscope

- PASS/FAIL output
- RS-232 Output
- USB-Interface

Demonstration of a sinus signal on 7’’ TFT- monitor of two channel portable oscilloscope

Optional equipment:

Substitute probes for two channel portable Oscilloscope PCE-SDS 10xx series

Transformer C1XX series
Transformer with diameter 52 mm, max. 1000 A AC, measurement of efficiency and harmonics

Transformer Y series
Transformer up to max. 500 A, max. encapsulation diameter 3 mm, for multimeter / oscilloscopes

ISO calibration ticket
(For firms which want to admit the two channel portable oscilloscope to the internal inspection equipment-pool or for annual recalibration. The certification according to ISO contains a laboratory- calibration including a test-certificate with complete measuring data.)

Here you can find further oscilloscopes regarding 'Two channel portable oscilloscope':

Here you will find an overview of all the measuring instruments available at PCE Instruments.

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments