Wind Direction Sensor PCE-FST-200-202
Robust wind direction sensor for permanent installation / powder coated / 
weather proof due to various kinds of sealing / analogue output signals

The wind direction sensor PCE-FST-200-202 detects the wind direction and displays the measured value immediately. Due to a simple mounting the wind direction sensor can be connected to a large number of meters. The wind direction sensor starts its measurement with slightest wind movements and shows those measuring values at real-time speed. The wind direction sensor starts measuring at a wind speed of less than even 0.8 mps. There are two editions of the wind direction sensor, that can be purchased, differing in their output signal. The wind direction sensor can be purchased either with a 4 ... 20 mA or a 0 ... 10 V DC output. The wind direction sensors can resist the roughest weather conditions due to their design. Since the wind direction sensor consists of a metal alloy that is resistant to oxidation, it prevents rust. Seals that are installed at very delicate spots protect the wind direction sensor from penetration of water and any other particles, such as fine dust. If there are any questions about this wind direction sensor PCE-FST-200-202 , please have a look at the technical specification below or call: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703.. Our engineers and technicians will gladly advise you regarding the air flow meters or any other products in terms of regulation and control, or scales and balances of PCE Instruments.

- Metal alloys
- Weather proof due to various seals
- Simple montage

- Long lifetime
- Immediate measurement of wind direction
- Measurement starts at low wind speed

General Technical Specifications of the Wind Direction Sensor PCE-FST-200-202

Measuring range

0 ... 360°

Measurement starts at

≤0.8 m/s

Resolution

22.5°

Measurement accuracy

±3 °

Operational Temperature Range

-20 ... +85 °C at ≤95 % r.H.

Output Signal

4 ... 20 mA (PCE-FST-200-202-I)
0 ... 10 VDC (PCE-FST-200-202-U)

Electrical Resistance

250 Ω

Operation voltage

12 ... 36 VDC

Maximum wind speed

70 m/s for a max. of 30 minutes

Electrical Connection

M12

Protection Class

IP65

Delivery content of the Wind Direction Sensor PCE-FST-200-202

1 x wind direction sensor PCE-FST-202-I or
1 x wind direction sensor PCE-FST-202-U,
1 x Instruction Manual

Similar products to the Wind Direction Sensor  PCE-FST-200-202:

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments