PCE-PHC 1 pH regulator 3-points regulator / 4 ... 20 mA signal for a recorder / measures pH and ORP / two-points calibration
|
The PCE-PHC 1 pH regulator measures and regulates the pH value in different elements. The PCE-PHC 1 pH regulator can influence on the pH value. The PCE-PHC 1 pH regulator is a 3-points device which means that it can affect in both alkaline or acid direction. Thanks to its two relay regulators the PCE-PHC 1 pH regulator can be use almost everywhere. Limit values for the 3-points regulation are set through the keys placed on the front of the PCE-PHC 1 pH regulator. There is also a LCD display on the front of the device which allows to view the current measured value. It is important to perform a quick and accurate test of water values specially in the industrial sector. All connections of the PCE-PHC 1 pH regulator are screwed so any pH electrode can be connected to the regulator. The PCE-PHC 1 pH regulator can be also connected to a display system thanks to a 4 … 20 mA output. Both measuring values and normalized signals are sent through the 4 … 20 mA output. The PCE-PHC 1 pH regulator is used in the galvanization sector, the control of clean and waste water as well as in the waste water neutralization. Thanks to its small dimensions, the PCE-PHC 1 pH regulator can be placed in any RAC cabinet. At the following link you will find the pH regulator that best suits your needs.
|
View or print user's manual of the PCE-PHC 1 pH regulator
|
- Compact size - Large backlit display - 2 regulation relays |
- Screwed connections - 4 ... 20 mA output - Two points calibration
|
Technical specifications |
Measurement range |
0 ... 14 pH -1,000 ... 1,000 mV |
Resolution |
0.01 pH 1 mV |
Output |
4 ... 20 mA max. 1 k ohm |
Regulation output (relay On / Off) |
Max. voltage: 220 V AC Max. current.: 3 A Max. power: 600 VA |
Calibration |
2-points |
Operating conditions |
0 ... 60 ºC |
Dimensions |
92 x 92 x 110 mm |
Power supply |
220 V AC / 50 Hz 110 V AC / 60 Hz |
Weight |
200 g |
Here you can see the connections of the PCE-PHC 1 pH regulator
|
Delivery contents 1 x PCE-PHC 1 pH regulator, user's manual |
Optional accessories Industrial pH electrode Industrial screw pH electrode with robust plastic housing. It has a screw to connect the device. The glass sphere of the electrode is well-protected by means of a plastic, so it is ideal to be used in industrial processes.
|
|
|
|
Here you will find an overview of all the measuring instruments available at PCE Instruments. |
Contact: PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39
|
Contact: PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714
|
This page in German in Italian in Spanish in Croatian in French in Dutch in Hungarian in Polish in Serbian in Russian in Turkish in Portuguese in Portuguese
|