KMU 100 temperature transducer for Pt100 sensors / 2, 3 or 4 wire connections / 4 - 20 mA output / aluminium or stainless steel connections
|
The KMU 100 temperature transducer is designed to detect temperature from Pt100 sensors and transform it into a normalized signal. The KMU 100 temperature transducer is distinguished by its compact dimensions which allow the usage almost with any sensor type. The KMU 100 temperature transducer is set online through an interface, however it can also be delivered with default parameters set. The KMU 100 temperature transducer can be used as a universal transducer and it can also be connected to 2, 3 or 4 wire Pt100 sensors. When the KMU 100 temperature transducer is connected to a 2-wire sensor, there is an automatic compensation of ducts to prevent inaccurate temperature readings due to duct resistance. The KMU 100 temperature transducer can be connected to any other device (for instance to a bar-graph indicator for a quick detection of temperature changes) through 4-20 mA input. At the following link you will find the temperature transducer that best suits your needs.
|
View or print user manual of the KMU 100 temperature transducer
|
- For Pt100 sensors - Installation in aluminium and stainless steel heads - Powered supply loop (4 - 20 mA) - High accuracy
|
- Optional interface cable and software - Measurement range up to 650 ºC - Suitable for WTR resistance sensors - Universal Power supply up to 35 V
|
Technical specifications |
Case |
PC plastic Diameter: 44 mm x height: 22.5 mm Central hole: 7 mm 2 M4 screws for DIN B case |
Input |
2, 3 or 4 wire Pt100 sensors |
Output |
4 ... 20 mA Maximum load 21 mA Minimum load 3.5 mA |
Measurement Range |
-200 ... 650 ºC |
Interval |
min. 10 K |
Accuracy |
<±0.1 % of the final value |
Operating temperature |
-40 ... 85 ºC |
Electrical connection |
screw terminal 1.5 mm2
|
Power supply |
10 ... 35 V DC Max. residual voltage ±5 % |
Image of the connections of the KMU 100 temperature transducer |
Here you can see the different connections of the KMU 100 temperature transducer
|
Delivery content 1 x KMU 100 temperature transducer and user manual |
Additional accessories PXU01 Parametrization kit: 1 x software, 1 x interface cable for USB, 1 x adapter for KMU and WTR temperature sensors series 4xx |
|
|
Here you will find an overview of all the measuring instruments available at PCE Instruments. |
Contact: PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39
|
Contact: PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714
|
This page in German in Italian in Spanish in Croatian in French in Hungarian in Turkish in Polish in Russian in Dutch in Portuguese in Portuguese
|