WTR 130 resistance thermometer temperature probe without clamping screw / without process connection / flat protective case / 3-wire Pt100 / aluminium or stainless steel case
|
The WTR 130 resistance thermometer has neither clamping screw nor process connection. The WTR 130 resistance thermometer offers an interchangeable probe. The WTR 130 resistance thermometer has been designed to operate within a measurement range of -50 .... +400 ºC. The WTR 130 resistance thermometer has an aluminium or stainless steel head. The KMU 100 transducer can be placed on the probe head thanks to its dimensions. The probe of the WTR 130 resistance thermometer is available with lengths from 50 mm to 350 mm. However, it is possible to adapt the probe length to the customers' needs. The WTR 130 resistance thermometer is specially suitable to measure temperature in pipes or vessels. The sensor can be attached almost everywhere using different clamping screws. Here you will find other Pt100 temperature sensors.
|
View or print user's manual of the WTR 130 resistance thermometer
|
- Measurement Range: -50 ... +400 ºC - aluminium or stainless steel head - 3-wire Pt100 temperature probe - Accuracy class A
|
- Sensor length up to 300 mm - Flat protective case - different clamping screws - It can be connected to the KMU 100 transducer
|
Technical specifications
|
Case
|
Connection: stainless steel or aluminium Protective case: stainless steel, Ø 6 mm
|
Pt100
|
3 wires
|
Measurement Range
|
-50 ... +400 ºC
|
Accuracy class
|
|
Lenght in mm
|
50, 100, 160, 200, 250, 300
|
Delivery contents 1 x WTR 130 resistance thermometer and user's manual
|
Optional accessories
|
|
KMU 100 transducer The KMU 100 transducer has been designed to detect temperature of Pt100 sensors and transform it into a normalized signal. The KMU 100 transducer is distinguished by its compact dimensions which allows to be used almost with any sensor type. The KMU 100 transducer can be connected to 2, 3 or 4 wires Pt100 sensors. When the KMU 100 temperature transducer is connected to a 2-wire sensor, there is an automatic compensation of ducts to prevent inaccurate temperature readings due to the duct resistance.
|
|
|
Here you will find an overview of all the measuring instruments available at PCE Instruments. |
Contact: PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39
|
Contact: PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714
|
This page in German in Italian in Spanish in Croatian in French in Dutch in Hungarian in Polish in Serbian in Russian in Turkish in Portuguese in Portuguese
|