Oscilloscope - Data Logger PKT 1190
digital recording oscilloscope with logic analyser up to 16 channels / 100 MHz bandwidth / sequence of measurement of 500 MS/s by channel / registry up to 6000 points by channel /  USB pen direct registry

The Oscilloscope-Data Logger PKT-1190 of 100 MHz has 16 channel logic analyser. The data visualisation in the Oscilloscope-Data Logger PKT-1190 is achieved through its 8'' TFT colour screen with high resolution and backlight. Through the USB connection, the Ocilloscope-Data Logger PKT-1190 can quickly transfer data  to the computer. Electronic equipment becomes more and more complex each time and the number of digital circuits and systems is growing. Due to the fact that the test signal is an analogical or digital signal, the user needs an analyser that verifies both digital signals and analogue ones. The Oscilloscope-Data Logger PKT-1190 does this. This unit is used in the formative area, in the sector of services and in the quality and protection systems. The measurement values can be stored directly onto a USB device. Its internal memory offers a capacity of up to 6000 points per channel. The different ways of trigger of the oscilloscope facilitate the work. There are other models of oscilloscopes that you will be able find here. In case you have any questions about the oscilloscope, please see the technical data below or  contact us: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our technicians and engineers will be pleased to advise you on this oscilloscope and on any other product of the regulation and control systems, meters and scales of Industrial Needs.

- Direct connection to USB pen

- Measuring sequence for each channel: 500
  MS/s in real time

- Maximum sensitivity: 5ns

- 100 MHz bandwidth

- 6000 points for each channel memory

- 66 MHz bandwidth

- Up to 16 channels

- Measurement rate input 0...5 V

- 4M/channel memory

- Sampling velocity form 1 S/s to 400 MS/s

Technical specifications

Oscilloscope

Bandwidth

100 MHz

Display

20 cm, TFT  8" (640 x 480 pixels)

Measurement values registry

Sampling velocity in current time

500 MS/s (current time) for each channel

Measurement sequence

regular, peak, average

ns - 100 s/div

Vertical component

Sensitivity

2mV - 10 V/div

Input coupling

DC, AC, GND

Input resistance

1 MΩ ±2 % in parallel with 15 pF ±3 pF

Maximum input voltage

400 V/DC and AC ss

3 %

8 bit

Raising flank 

< 3.5 ns

Trigger

Trigger mode

flank, video, alternate, mains supply

20 parameters

Mathematic waveform

addition, subtraction, inverted

Logic analyser

66 MHz

16

1 S/s up to 400 MS/s

1 MΩ ±2 %

0 ... 5 V

Limit voltage value

0 ... 4 V (4 settings)

Trigger mode

1flank, bus, status, synchronised, trigger, 

Trigger position setting

before, centre, after

Memory

4 M/channel

Memory settings

10

binary, decimal, hexadecimal 

Technical specifications

AC 100 ... 240 V AC/50 Hz

Dimensions (width x height x depth)

370 x 180 x 120 mm

Weight

2.1 kg

Delivery content

1 x  Oscilloscope-Data Logger PKT 1190, 2 x probes with BNC connection, 1 x USB cable,  1 x software, 1 x mains cable, 1 x probe point, user manual

Additional components

- Replacement probes
- DIN ISO calibration certificate

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments