Earth Meters
At PCE Instruments you will find earth meters to determine ground resistance for both specific and ohm resistances. Earth meters are powered by batteries and have a clock timer function (3 minutes), Data-Hold function, 4-digit LCD display and their dimensions are 163 x 100 x 50 mm. Resistance ranges come in the range from 20, 200 to 2000 ohms. They have a resolution of 10 / 100 mΩ / 1 Ω. Earth meters measure resistance by means of a constant reverse current (approx. 800 Hz, 2 mA). To measure ground voltage a rectifier is used  (5 kΩ/V aprox. 40 upto 500 Hz). Earth meters PKT-2630 series have a small format function as well as multiple other functions. Now, you can see the difference between the ground conductor, phase conductor and the neutral conductor too easily. Defective connections, old cables as well as a faulty ground conductors can now be easily discovered. At the beginning, earth meters were created specially to be used in medicine to determine discharge current in hospital beds and stretchers. If you can't find the earth meters you are looking for, please contact us and we will help you find the best solution to suit your needs by calling our offices on: UK customers +44(0) 23 809 870 30 / US customers (561) 320-9162 and our technical staff will advise you regarding our measuring instruments. Our engineers and technicians will be happy to help you with the earth meters, and of course, with the other products in the field of regulation and control, and scales and balances.

Here you can see earth meters from these companies:

Technical information about Earth Meters can be found at the following links:

- PeakTech PKT-1115 Earth Meters 
  (earth tester with earth potential gauge, with grounding spikes, up to 2000Ω, AC)

- CA-642x series Earth Meters
  (Earth meters with built-in earth potential gauge, three-wire measuring mode, up to 2000 Ω)

- CA-6471 Earth Meters
  (Earth meters with earth current stake and measuring clamps, several measuring functions)

- CA-6460 Earth Meters
  (Earth meters for earth, ground and contact resistance, 2, 3 and 4-pole measurement)

Earth Meters with clamp

- CA-6410 Earth Meters
  (Earth meters in a clamp design, up to 1200 §Ù, 32 mm diameter of the clamp)

- CA-6412 Earth Meters
  (Earth meters as built-in clamp meters, measuring range up to 30 A)

- CA-6415 Earth Meters
  (Earth meterswith alarm-function and data storage, non-contact measurement up to 30 A)

If you wish to print a selection of the earth meters from our printed catalogue, click the PDF symbol.