Ozone Meter Tetra 5 / Tetra 5 O3
ozone meter for ozone and oxygen with approval (ATEX II 2G EEx iad IIC T4)

The Ozone Meter warns acoustically, visually and also by vibration. Additionally, this Ozone Meter shows measurement values on the large LCD screen. There are two versions of this Ozone Meter: the Tetra 5 Gas Meter which detects two gases simultaneously (ozone and oxygen) and the economic version of the Tetra 5 O3 which offers only ozone measurements.
The handling of the Ozone Meter happens by means of a single button. Moreover, the Ozone Meter saves data in its memory when a value limit is surpassed. The data can be transmitted to a PC or laptop with the interface and software for a computer. The Ozone Meter is used for the inspection of channels (treatment of residual water ozone) and in the chemical industry. If you have any questions, we would be happy to advise you on this ozone meter and of course, on our other products in the field of regulation and control, measuring instruments and scales or balances.

Ozone Meter Tetra 5/Tetra 5 O3

- Visual alarm: blue and red LED

- Vibration alarm

- 128 x 64 pixels graphic display with backlight

- Memory of events that saves date if value limit is   exceeded

- One button handling

- ATEX approval

- Sensors can be changed on site in risk places

The meter is delivered calibrated, but you will have to recalibrate it regularly, e.g. once a year. This is not necessary for the oxygen sensor because this has a life-span of one year. After this, it should be recalibrated at least once a year or replaced. With the Tetra it is possible to change sensors on site with the aid of our service staff. This saves time and money.

Chemical industry

Channels inspection

Delivery content
1 x Ozone Meter Tetra 5, (ozone meter or ozone and oxygen meter), 1 x  accumulator, 1 x subjection for the belt, 1 x user manual.
Attention: Charger must be ordered separately

Optional
- Charger (component to connect to  network)
- Cable for the PC (interface RS-232)
- Software to calibrate, to set up and to read logger of results
- Subjection for the belt
- ISO 9000 Calibration certificate

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments