PCE-PI 1 phase rotation meter
economical and easy to use phase rotation meter

The PCE-PI1 phase rotation meter has a solid housing and a big LCD display to determine easily the rotation direction of phases and engines. Additionally, casual problems in any phase are shown on the display. The rotation meter meets the CAT III 600 V and IEC-61010 standards. The PCE-PI 1 phase rotation meter is the ideal tool to determine the rotation of the phase in all the places where three-phase current is used to power both engines and electric systems. It has a voltage range up to 690 VAC. With this rotation meter damages in engines or installations which appear due to a wrong rotation direction can be detected. You will find an overview of all the rotation meters at this link.

- Easy to handle

- Strong alligator clips

- Measurement of the three-phase current form 40 to 690 V AC

- Batteries are not needed

- Security: IEC-61010, CAT III 600 V

- Protection type: IP-40

- Big LCD display

           View or print user's manual

- Safety check clips (set of 3 clips)
Safety check clips with a 4 mm diameter and  metallic ends. Due to the fact that the protection of the handle is flat, you will be able to connect diverse safety check clips in a small area to avoid they slide in inclined surfaces.
CAT III category up to 1000 V.

Here you will find all the measuring instruments available at PCE Instruments.

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone. +44 ( 0 ) 2380 98703 0
Fax +44 ( 0 ) 2380 98703 0