Screen Recorder PCE-KD9
DIN rail datalogger with data storage / universal input / 4 ... 20 mA or 0 ... 10 V output / 
top hat rail montage / alarm relays / LC display / sensor supply

The screen recorder PCE-KD9 can be applied to either capture, visualize, save or control measuring data and processes. This screen recorder is a device for universal application based in Linux operation systems. Through three slots, each with inputs, the screen recorder can be equipped with up to 72 analogue inputs, 72 binary inputs, 36 TC inputs (e.g. type K thermal element), 18 RTD inputs (e.g. PT100 probes), 36 relay / SSR- inputs or 24 analogue outputs. That wide range of options qualify the screen recorder for almost any application, that one might think of. The captured processing and switch signals are directed onto 90 internal logical channels of the screen recorder and thus they can be processed in several ways or they can be used via 8 integrated PID regulators for process regulation. There is also the option provided to use the 1.5 GB internal data storage of the screen recorder to feed-in data with a maximum sampling rate of 10 Hz. Thus  a maximum of 200 values per second can be logged by the screen recorder PCE-KD9, while the total capacity of the screen recorder counts more than 2,000,000 values. To optionally view that data their is a coloured TFT display with a touch screen. The screen recorder is able to display the captured data in 6 different display modes. An interaction with superordinate process control systems or with subordinated sensors or signal converters can be realized through a variety of interfaces. USB and Ethernet can also be connected by equipping the slots of the screen recorder with the relevant modules. Thus even a mouse or a keypad can be connected to the screen recorder PCE-KD9 by using the relevant interface. By means of the optional software the range of applications can be further expanded. The software facilitates capturing, archiving and displaying the data so that the data sent by the screen recorder can be analyzed. In case that you should have more questions regarding the screen recorder PCE-KD9, please read the following technical data, use our contact form or call us: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our technicians and engineers will gladly advise you regarding the display systems or all other products in the field of Control Systems, Laboratory Equipment, Measuring Instruments or Scales and Balances of PCE Instruments Ltd.

- Max. 72 analogue and binary inputs
- TFT display with graphics support, touch screen
- Power supply 24 V DC / 200 mA
- 8 integrated PID controllers

- Interface RS485 / Modbus RTU
- 3 slots with eligible assembly
- Sampling rate max. 10 Hz
- Optionally with Ethernet interface

Technical specifications

Input (max.)

72 analogue inputs (0 ... 20 mA or 0 ... 10 V)

72 binary inputs 
(low: 0 ... ± 1 V, high: ± 3 V ... ± 30 V)

36 thermal element inputs 
(Type J, K, S, T, N, R, B, E)

18 RTD inputs (Pt100, Pt500, Pt1000)

Outputs (max.)

24 analogue outputs (4 ... 20 mA)

36 relays (1 A / 250 V)

72 SSR (100 mA / 15 V)

Transducer supplying

24 V DC ± 5 %, 200 mA (not with UN3, UN5, U24, I24, UI12, RT6, TC12, D24, R121, R65, S24, IO6, IO8)

Digital interfaces

2x RS485 
1x RS485/RS232
1x USB Host
1x USB Device
1x Ethernet 10 Mbit/s

Display

8.9 cm (3.5 ") TFT with graphic support, coloured (16 Bit), 
320 x 240 pixel, touch screen

Voltage supply

19 ... 50 V DC / 16 ... 35 V AC or 
85 ... 260 V AC/DC

Power input

15 VA typical, 20 VA max.

Protection type

Standard:
IP 65 (front folio), IP 20 (enclosure and clamps)
Option 01:
IP 65 frame (to seal frontal panel)
Option 0B:
IP 40; IP54 (with doors that can be shut)

Data storage

internally 1.5 GB (>2 Mio. measurements)

Sampling rate

max. 10 Hz or max. 200 values per second

Enclosure

front panel installation

Enclosure material

NORYL - GFN2S E1

Surrounding temperature

In operation mode: 0 ... +60 °C
Storing: -10 ... +70 °C

Dimensions

144 x 144 x 100 mm

Switch board dimensions

141 x 141 mm (frontal panel max. 5 mm)

Display of the Screen Recorder PCE-KD9 in different modes

Graphs at the screen recorder PCE-KD9

System state shown on screen recorder PCE-KD9

Display of data on screen recorder PCE-KD9

Screen recorder PCE-KD9 in ship mode

Bar diagram of screen recorder PCE-KD9

Screen reorder PCE-KD9 in metering mode

Display of e.g. wind speed and wind direction as a vector diagram by the screen recorder PCE-KD9

The display can indicate every channel in a different colour.

Compatible IO cards (max capacity of 3 IO cards per screen recorder)

Further Options

Clearance of data logger function

License to activate the datalogger function
(also subsequently performable)

ACM module

Extended communication module with:
1x RS485 
1x RS232
1x USB Host
1x Ethernet 10 Mbit/s

ETU module

1 x USB-Host
1 x Ethernet

Second USB- Port

Second interface for USB-host

Application

Examples of applications for the screen recorder PCE-KD9

Delivery Content

1 x Screen Recorder PCE-KD9 (with desired configurations), 1 x instruction manual

Optional Equipment

Door with locks and polythene foil:
In order to protect the screen recorder from external mechanical impact, as well as un-authorized manipulation, this door can be installed. Due to the transparent door, the data can be still seen. The level of protection is raised to IP42.

Table stand PCE-TGH905 for PCE-KD9
The table stand for the PCE-KD9 allows using the data logger even without a switch board. By means of this table stand for the screen recorder it can be also applied in laboratories. There is also a wall enclosure PCE-WGH905 with IP65 protection in our assortment, which allows mounting the screen recorder directly at the wall near the measuring location.

Rail adapter for PCE-KD9
The rail adapter allows installing the screen recorder PCE-KD9 on a DIN-U-profile.

USB / RS485 converter
RS232 / RS485 converter
The converter allows data exchanges with a computer

Software DAQ Manager Software Box
The DAQ manager receives the data captured by the screen recorder and enables their display and archiving. Therefore it has no relevance whether the data is read-out from a USB memory card or received via the Ethernet directly from the screen recorder PCE-KD9.

Similar products to the Screen Recorder PCE-KD9:

Here you will find an overview of all the measuring instruments available at PCE Instruments.

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments