Wind Sensor PCE-WL 2 suited for mobile measurements / data memory on SD cards / wind direction sensor / wind speed sensor / battery powered / internal temperature sensor
|
The Wind Sensor PCE-WL 2 is used to measure current wind situation before starting wind energy plants. The wind sensor saves measured data for wind direction and wind speed on a SD memory card. After measuring the data can be evaluated on a PC. The casing is weather resistant and protected according to IP65. The cable of the Wind Sensor PCE-WL 2 will be connected via screwed connections. The wind sensor is measuring velocities up to 40 m/s and wind directions
over a range from 2.5 º - 357,5 º. The anemometer of the wind sensor is equipped with low wear reed relays that ensure a long life-time. Optionally, the Wind Sensor PCE-WL 2 is able to be equipped with a display. This display shows measured results of wind direction and velocity immediately.
If there are any questions about these products, please contact us: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. An overview of all
anemometers can be found here: anemometers. Our technicians and engineers will be happy to help you with this
outdoor weather station and all other products in the field of
measuring instruments,
regulation and control and
scales.
|
|
|
- Hard casing
- Internal temperature sensor
- Internal clock
- RS232 interface for configuration
- Display optionally available
- Battery life time up to 1 year
|
- Memory on a SD card as CSV data
- Environmental temperature -15 ... 50 ºC
- Memory of average values and maximum
results
- Measuring range wind velocity 1 ... 40 m/s
- Measuring range wind direction 2.5 º ... 357.5 º
|
Technical
Specification Wind Sensor PCE-WL 2
|
Data memory
|
SD/MMC
card (FAT 16/32)
|
Voltage supply
|
2
x 1.5 V batteries, type C
|
Environmental temperature
|
-15
... + 50 ºC
|
Inputs
|
1
x analogue input (wind direction)
2 x digital input (wind velocity)
|
Interface
|
RS232
|
Interval of memory
|
10
sec, 1 min or 10 min
|
Memory medium
|
SD
memory card (max 2 GB)
|
Type of data
|
CSV
data, ASCII
|
Casing
|
hard
plastic casing
|
Protection standard
|
IP65
|
Dimensions
|
160
x 80 x 55 mm
|
Weight
|
450
g
|
Wind energy sensor
Wind energy- velocity sensor
|
|
Measuring range
|
1
... 40 m/s
|
Sensor
|
2
reed contacts (zero potential)
|
Output
|
impulses
zero potential
|
Resolution
|
2.3
Hz/ms-1
|
Maximum applied load
|
10
VA, 0.5 A, 42 VDC
|
Wind energy wind direction sensor
|
|
Measuring range
|
2.5
... 357.5 ºC
|
Sensor
|
0
... 1 KΩ
|
Neutral position
|
5
º open to north
|
Wind energy sensor general technical data
|
|
Dimensions
|
418
x 30 mm
|
Mast support
|
31
x 26 mm
|
Protection standard
|
IP54
|
Weight
|
1
kg
|
|
Delivery Content
|
|
1 x Wind Sensor PCE-WL 2, 1 x wind sensor, 1 x 256 MB SD memory card, 2 x battery, manual description
|
Optional
Equipment
|
Display
PCE-WLD
The PCE-WLD display will be connected easily onto the wind sensors interface. After connection with
voltage supply the display will show all currently saved data of channel 1. The display can be activated and deactivated via a button. Furthermore the user can choose between non-stop operation and defined operation.
|
|
|
|
|
Here
you will find further products regarding 'Differential Pressure Anemometers':
|
- Wind
Sensor PCE-WL 1
(Wind sensor, same as PCE-WL 2 but just with an anemometer, wind direction
sensor
optionally available)
Wind
sensors as weather stations:
- Wind
Sensor Weather Station PCE-FWS 20
(wind
direction,
wind velocity, temperature., humidity, amount of rain, logger, software)
-
Wind
Sensor Weather Station Watchdog
(wind velocity / wind direction + humidity + bar. pressure + temp. ..., logger,
software)
-
Wind
Sensor Weather Station WMRS200
(USB wind sensor station to analyse and
display wind data with several sensors)
|
Here you will find all the measuring instruments available at PCE Instruments
|
Contact: PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39
|
Contact: PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714
|