|
|
Pressure Transmitters The pressure transmitters are used for the control of pressure systems, like for example, an installation of air pressure. On the other hand, the pressure transmitters can also be used to control pressures in boilers and to direct them by means of a system of regulation and control. The possibility of giving a standardized signal as exit allows to connect the transmitters of pressure to any system of regulation, which offers to the user an endless number of applications. The pressure transmitters are also used for the control of filter systems. In case a pressure in one of the two entrances of a differential pressure transducer is generated, a value will be indicated. In connection with a control system, an alarm can be generated indicating that the filter is saturated, which allows to work in a safe and clean form. If you have any technical question about pressure transmitters, please call us on +44 ( 0 ) 2380 98703 0 and our technicians and engineers will be pleased to help you regarding pressure transmitters as well as the rest of measuring instruments and scales. Technical information about our Pressure Transmitters can be found at the following links:
|
- Pressure Transmitters PCE-MS 3 and 4 series (Pressure transmitters to transform differential pressure up to 2500 Pa into a standard signal)
|
|
- Pressure Transmitters PT-LE series (Pressure transmitters for differential pressures, with control contact and analog output)
|
|
- Pressure Transmitters DP100 series (to measure pressure with alarm output and display, range -1 ... 1 bar or -1 ... 10 bar)
|
|
- Pressure Transmitters DP100A series (for e measuring range of -1 ... 1 bar or -1 ... 10 bar, with analog tension output)
|
|
- Pressure Transmitters VSC42 series (for vacuum measurement range of 1400 to 1 mbar, exit 4 .. 20 mA)
|
|
- Pressure Transmitters VSC42C series (from 1400 to 1 mbar, chemical resistant ceramic sensor for aggressive environments)
|
|
- Pressure Transmitters VSP62 series (for absolute pressure of 1000 to 1 x 10-4 mbar, logarithmic 0th .. 10 V output)
|
|
- Mobile Pressure Transmitters (Pressure transmitters to measure overpressure and underpressure, in different versions)
|
|
|
The physical magnitude pressure appears of three forms in the regulation systems: differential pressure, relative pressure and absolute pressue. In order to determine the type of pressure it is necessary to know the reference point. The differential pressure indicates the difference of pressure between two systems of pressure. Both systems are connected to the two connections of the pressure transducer. Thus, the reference point will be one of the two systems. The relative pressure is about the pressure between a pressure system and the environmental pressure. In this case, the environmental pressure is the reference point. The absolute pressure uses as reference point the emptiness or void, that is to say, no pressure. In the measurement of pressure, sensors with different principles from measurement are used. These sensors influence on the maximum rank of measurement, the speed of reaction, the accuracy of a measurement and other parameters.
|
If you wish to print or view a selection of pressure transmitters from our catalogue, click the PDF symbol.
|
You are currently at: Home / Control Systems / Transducers / Pressure Transmitters
|
If you have any questions, call our offices on: +44 ( 0 ) 2380 98703 0.
|
|