Pressure Transducer DP 100 pressure transducer that measures depression and overpressure combined / three-color LCD screen / different pressure units / M5 and G1 threaded connection / 8 pressure
|
The pressure transducer DP100 Series is ideal for controlling and displaying air pressure and corrosive gases in industrial applications. This pressure transducer is a very reliable thanks to its high resolution, high reproducibility and low hysteresis. The current pressure value is displayed on the LCD screen of the pressure transducer, which has two lines and 12 segments. The operator can select the units of the pressure transducer. You can also adjust the response time of the pressure transducer from 2.5 to 5000 ms. The connection of the pressure transducer is made through an M5 internal thread or an external thread G1 / 8. The pressure transducer DP100 offers two transistor outputs. The pressure transducer has various modes of operation. It is possible to operate in "on" or "off" and it can also make the connection with hysteresis or as a comparator with Windows. The pressure transducer connection is possible with the plug connector with a 2m cable or an M8 plug. The pressure transducer can be used for suction control, for regulation of pressure value, or for a pressure sealing test to name a few examples. At the following link, there are other models of pressure transducers to suit your needs.
|
|
Pressure transducer DP 100
|
- Measurement range: -1 ... +1 bar or -1 ... 10 bar - Lock function - M5 internal thread and G1 / 8 threaded outer connection
|
- On-screen display in 3 colors and 12 segments - 2 PNP transistor outputs - Response time set up
|
Technical specifications |
|
|
|
Measurement range
|
|
|
Maximum overpressure
|
|
|
Resolution
|
|
|
Reproducibility
|
|
|
Temperature dependance
|
|
|
|
Measurement dvalue indication
|
On-screen display in 3 colors and 12 segments
|
Means
|
non-corrosive gases
|
Response time
|
2.5 ... 5,000 ms
|
Outpate mode
|
On / Off, hysteresis, window comparator
|
Housing material
|
plastic
|
Protection
|
IP40
|
Dimensions
|
30 x 30 x 25,5 cm
|
Connection type
|
DP10xEP: Connection Cable DP10xEPJ: M8 Connection
|
Power supply
|
12 ... 24 V DC
|
Environmental conditions
|
-10 ... +50 ºC
|
Weight |
approx. 45 g. |
Delivery content
1 x DP100 series pressure transducer, 1 x plug cable 2 m (only for the DP10xEP), instructions for use
|
Available versions
|
DP101EP
|
-1.00 ... 1.00 bar, connection
|
DP102EP
|
-1.00 ... 10.0 bar, connection
|
DP111EPJ
|
-1.00 ... 1.00 bar, connection -M8
|
DP112EPJ
|
-1.00 ... 10.0 bar, connection -M8
|
Optional components
|
Connection cable
|
Type
|
Length
|
DP100-C2
|
Connection cable
|
2m
|
DP100-C5
|
Connection cable
|
5m
|
DP100-UZ20
|
M8 pug, straight
|
2m
|
DP100-UZ50
|
M8 pug, straight
|
5m
|
DP100-UZ21
|
M8 pug, in angle
|
2m
|
DP100-UZ51
|
M8 pug, in angle
|
5m
|
|
Mounting accessories
|
DP100-DP1
|
Mounting angle for the table
|
DP100-DP2
|
Framework for mounting a panel
|
DP100-DP3
|
Front cover for the sensor mounted to a panel (only in combination with DP100-DP2) |
|
|
|
Here you will find all the measuring instruments available at PCE Instruments. |
Contact: PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39
|
Contact: PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714
|
This page in German in Italian in Spanish in Croatian in French in Dutch in Hungarian in Polish in Serbian in Russian in Turkish in Portuguese in Portuguese |