PCE-HTD series
dynamometer
with bi-directional
needle, two models (0 to
1 N and 0 to 3 N),
measures the same range
positive as in negative |
The PCE-HDT series
dynamometer is used for accurately and quickly
detecting small forces in pieces of electrical
components, switches, relays, etc. This
dynamometer is also
used for technical applications in the medical
sector. The dynamometer has a drag needle that,
once the measurement is taken, marks the peak
value. With this dynamometer, measurements can be
taken both in negative, as well as in positive
ranges. The drag needle can also be used in both
ranges. The stress plate has a small perforation
that allows measurement of forces on wires or
forces on springs. This
link
shows other models of digital dynamometer for
traction or compression force up to 100kg. An
overview of all our dynamometers can be found
here. |
Front view of the dynamometer. |
Rear view of the dynamometer. |
- for testing
forces in relays, switches, push buttons,
etc. or for determining force being
exerted on wires or springs.
- unit scale of 0.05 N / easy to read, measures in both positive and
negative.
- needle functions both ways to ensure a clearer reading of peak
value. |
Dimensions |
|
Technical
specifications |
Dinamómetro de muelle contactor modelo |
PCE-HTD 1 |
PCE-HTD 3 |
Measurement
range |
0.1 to 1 N |
0.1 to 3 N |
Division |
0.05 N |
0.1 N |
Needle |
yes, used two
ways |
Stress plate |
stainless steel
with perforation for a wire |
Enclosure |
ABS plastic |
Dimensions
|
see image above |
Weight |
55g |
Contents
PCE-HDT series dynamometer, plastic case and user's manual
|
|
|
Here you will find all
the measuring
instruments available at PCE Instruments.
|
Contact: PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39
|
Contact: PCE Americas Inc.
711 Commerce Way suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714
|