Electric Smog Indicator esi 24
Electric Smog Indicator with easy LED traffic light system for classification the test reading / measures magnetic, electrical and high-frequency radiance (50 MHz ... 3 GHz) / 
/ high-resolution HF-mode (15 LED) / acoustic alert / excellent WLAN-detection

The Electric Smog Indicator esi 24 is the first model of the esi-series by eSmog Tec. This high sensitive Electric Smog Indictor enables you to check independent and very easy, if electrical devices spread electric smog in your rooms. The Electric Smog Indicator is one of the small number of devices, which measure low-frequency electrical fields, magnetic fields and high-frequency radiance. The LED traffic light system allows you to dispense an adequate assessment of the radiance. The Display shows 5 different conditions (from no anomaly up to extreme anomaly). At all model the levels of the LED Display are geared at effective approximate values. To get an accurate measurement with the Electric Smog Indicator as possible you should notice the following details: System specific the highly sensitive sensors of the Electric Smog Indicator produce an impulse already at easy vibrations, which is displayed. Determinations should be only operate shock-free and vibration-free. At the localize of an electromagnetic field, the Electric Smog Indicator is not allowed to contact the radiation source or with not-isolated cable. In case that you have any questions about the Electric Smog Indictor esi 24, read the technical data or get in contact with us: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our technicians and engineers will inform you about our radiation meters / meters of radiation or any other product of in the field of Regulation and Control, Measuring Instruments or Scales and balances of PCE Instruments.

- with LED traffic light system
- magnetic, electrical, high-frequency radiance
- locating of electrical cable
- high-resolution HF-mode (15 LED)

- acoustic alert
- three spooling 
- 3-dimensional magnetic field measurement
- excellent WLAN-detection

Technical specifications

Simultaneous detection

LF alternating magnetic field - 
Low frequency: 16 Hz ... 3 kHz in nT
LF alternating electric field - 
Low frequency: 16 Hz ... 3 kHz in V/m
HF electro-magnetic waves - 
High frequency: 50 MHz ... 3 GHz in µW/m²

Optical display

using LEDs - light-emitting diodes: green, green and amber, amber, amber and red, red. Range of measurement is determined by guideline values for sleeping areas.

Audible indicator

Sound frequency changes with increasing field strengths.

Location mode

for electric cables: 220/230 V ... 50/60 Hz
Optical display with two light-emitting diodes (green and red) at the top of the display unit.

"Freeze" mode

The measurement is stored for hidden locations where the display is not directly visible.

Measurement processing

by means of 8-Bit micro-controller

Power supply

9 V battery pack

Operating time

10 ... 15 h in permanent operation

Weight

140 g

Dimensions

140 x 63 x 30 mm

Examples of use

The electric smog indicator esi 24 is used at radio masts near inhabited areas. The electric smog pollution can  be read and consequently a potential danger can be determined or eliminated. 

EMF-swellings which can be identified by the esi 24:  cordless telephone set, WLAN, Wi-Fi, mobile phone base station, high voltage power lines, electric installation, baby phones, mobile phones, etc.

Delivery content

1 x Electric Smog Indicator esi 24, 1 x 9 V battery pack, 1 x user manual

Similar products to "Electric Smog Indicator":

Here you will find an overview of all the measuring instruments available at PCE Instruments.

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714