3D Low Frequency Analyzer NFA 1000

3D Low Frequency Analyzer NFA 1000
3D Low Frequency Analyzer with data logger / for alternating electric and magnetic fields / different adjustable filters / for professional low frequency measurements / Geiger counter

The 3D Low Frequency Analyzer NFA 1000 includes a data logger. The 3D Low Frequency Analyzer measures through a 3D voltage-free sensor. The 3D Low Frequency Analyzer NFA 1000 measures the magnetic field on a real isotropic point. The measurement procedure of the 3D Low Frequency Analyzer is a patent of GIGAHERTZ SOLUTION. The 3D Low Frequency Analyzer NFA 1000 can detect alternating electric and magnetic fields up to a frequency of 1000 kHz. This is much higher than the required TCO regulations for jobs which use computers. The measurement range of the 3D Low Frequency Analyzer is from 0.1 V/m to 1999 V/m in the strength of the electric field, and from 1 nT a 19999 nT in the magnetic flow. The signal evaluation is automatically done. The real effective value, peak value, and evaluations of peak retentions are not a problem. The 3D Low Frequency Analyzer NFA 1000 has an internal data logger. The 3D Low Frequency Analyzer records the measured values on an SD card, included in the pack. The NFA analyses software conducts the evaluation. In case that you have any questions about the 3D- 3D Low Frequency Analyzer NFA 1000, read the technical data or get in contact with us: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our technicians and engineers will inform you about our magnetic field analyzers or any other product of in the field of Regulation and Control, Measuring Instruments or Scales and Balances of PCE Instruments.

- Frequency range up to 1000 kHz
- Measurement range up to 1999 V/m
- Geiger counter
- Retention peak measurement

- For construction biologists
- Storage operating system
- Different adjustable filter
- For electric and magnetic fields

Technical specifications for the 3D Low Frequency Analyzer

Frequency Rate

5 Hz ... 1000 kHz

Readings recorders

Electrical field strength, without voltage, 3D
Electrical field strength, subject to voltage
density of magnetic flow, 3D

Measurement range

Density of magnetic flow: 1 ... 19999 nT
Electrical field strength: 0,1 ... 1999 V/m

Accuracy (depending on frequency)

50 / 60 Hz
16 Hz ... 30 kHz
5 Hz ... 1000 kHz
Isotropic deviation

± 5 %, ± 5 digits
± 1 dB, ± 3 digits
± 2 dB
± 1,5 dB, ± 3 digits

Audio analysis

Acoustic signal in proportion to field strength
(with Geiger counter, to connect additionally)

Signal evaluation

Real effective value
Peak value
Peak retention

Filters

16 Hz bandpass
50 Hz high pass
2 kHz low pass

Power supply

7,4 V Li-Ion battery
Low battery alert, switches off automatically
Network adaptor / charger (included in the pack)

Average operating duration

36 hours in recording mode

Weight

approx. 1150 g

Delivery content of the 3D Low Frequency Analyzer

1 x 3D low frequency analyzer NFA 1000 with silicone cover, 1 x SD-HC card 4 GB, 1 x earthed cable with high flexibility, 1 x earthed connectors, 1 x connector cable for low frequency analysis, 1 x Li-Ion accumulator, 1 x network adaptor / charger, 1 x USB cable, 1 x evaluation software, 1 x carrying case, 1 x detailed instruction manual

- Low Frequency Analyzer NFA-30 M (Low Frequency Analzyer with data logger, 16 Hz ... 32 kHz
- Low Frequency Analyzer ME3951A (Low Frequency Analyzer for up to 400 kHz, for electric and magnetic fields)

Here you will find an overview of all the measuring instruments available at PCE Instruments.

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714