Internal Grooves Caliper PCE-DCP 150I
Internal grooves caliper PCE-DCP 150I with pointed measuring surface and short measuring branch / switch between inch and mm / for measurements for internal grooves and punctures

The internal grooves caliper PCE-DCP 150I is a special caliper with jaws which are unwounded outside. That is why the internal grooves caliper is perfect to measure for example punctures, transversal arches, shaft mounting and trepan. With the short measuring branches the internal grooves caliper is very good to treat. According to length of the measuring branches it is possible that there are bends. The right metering is very important. The advantage of the digital internal grooves calipers is the easy to read display which is good for lays. For further information about the internal grooves caliper, please read the following technical data or call our hotline: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our technicians and engineers will gladly advise you regarding the internal grooves caliper or any other product in terms of regulation and control or scales and balances by PCE Instruments.

- with setscrew
- with threaded chart
- easy execution

- for internal grooves and punctures
- stainless steel
- long measuring branches

Technical Data of the Internal Grooves Caliper PCE-DCP 150l

Internal grooves caliper

PCE-DCP 150l

Measuring range

0 ... 150 mm
0 ... 6 "

Needle

0,01 mm
0,0005 "

Accuracy 

± 0,03 mm

Display

LCD-display

System

linear, wireless, CAP-measuring system

Velocity

max. 1,5 m/s

Power supply

1,5 V, type SR44

Ambient temperature

0 … 40 °C

Storage temperature

-20 … +70 °C

Delivery Content of the Internal Grooves Caliper PCE-DCP 150I

1 x Internal Grooves Caliper PCE-DCP 150I, 1 x battery, 1 x plastic case, 1x manual

In the following, you can see further products to the term "internal grooves caliper":

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments

Below you will find an overview of the different product groups of scales and scales