Isolating Transformer PCE-P17I
Isolating transformer for galvanic isolation from 0 to 20 mA signals/ Power supply via electricity loop/ merely 6 mm wide / rail mounting / specially for PCE-P18

The isolating transformer PCE-P17I is used when signals must be galvanically isolated from each other. For example, the Isolating Transformer PCE-P17I separates interconnected masses. When transducers or transmitters don’t have an isolating transformer, the masses are oftentimes interconnected. The consequence of this is that measuring errors appear due to signal interferences. The isolating transformer prevents this problem. The isolating transformer is often applied in order to use both of the PCE-P18’s power signals. If combined, the isolating transformer can then pass the measuring signals on to the PCE-KD5. For further information about the Isolating Transformer PCE-P17I, please read the following technical data or call our Hotline: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our engineers and technicians will gladly advise you with the Isolating Transformer PCE-P17I or any other product in the area of regulation and control, scales and balances of PCE Instruments.

- Galvanic isolation of 0 to 20 mA signals
- Power supply via current loop
- Low installation width

- Mounting on DIN rail
- Filters out high frequency noise
- Simple installation

Technical Specification of the Isolating Transformer PCE-P17I

Input signal

0 ... 10 V

Reaction stream

150 uA

Max. input electricity

40 mA

Max. input Voltage

30 V DC

Output signal

0 ... 20 mA (4 ... 20 mA)

Load (RLOAD)

0 Ω ... 100 Ω (max. 500 Ω)

Conductor cross-section

0.2 mm ² ... 2.5 mm ² (AWG24-12)

Mounting width

6.2 mm

Power

19 ... 30 V DC

Weight

80 g

Ambient temperature

- 20 ° C ... + 65 ° C

Ambient humidity

<95% non-condensing

Scheme for the connection of the Isolating Transformer

Function principle of the Isolating Transformer

Delivery content of the Isolating Transformer PCE-P17I

1x Isolating Transformer PCE-P17I, 1x manual

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments

Below you will find an overview of the different product groups of scales and scales