LAN Cable Tester LanExpert
LAN cable tester for network inspection, network maintenance and recognition of error causes  / applicable in inline mode /  applicable for Profinet lines as well

The LAN cable tester provides the technician with professional, quick help in maintenance, measurement and optimization of network services. Due to the extensive functionality of the LAN cable tester the user has the option to drive it in inline mode, to use a single port. The LAN cable tester can even initiate simultaneously both ports irrespective of one another. Via the function modes cabling test, link recognition, Ping and Trace Route the point-to-point (P2P) connections as well as the connectivity of the network altogether. Via an extensive network packet monitor, filtering and packet capture complex network problems can be be detected and repaired. A flexible file-generation of network traffic and structured stress tests of the network can be performed with the LAN cable tester LanExpert. Those explore the network performance at different network loads. VoIP,  e-mail and inline PoE tests serve the required statistics and measuring values, which are the determine factors for a smooth working network. The LAN cable tester LanExpert is a hand-held device for network analysis and error search - from cabling to packet transfer. If there are any questions about this LAN cable tester LanExpert, please have a look at the technical specification below or call: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our technicians and engineers will gladly advise you in all LAN cable testers and all products in the field of measuring instruments, regulation and control and scales. 

- Complete inline packet check 
- Both ports simultaneously and independently from one another applicable
- Even applicable for profinet lines
- Recognition of network protocols with number of packets and percentage of network traffic
- Collecting up to 10,000 packets with data filtering for analysis or download on PC. 
- Analysis of VoIP traffic to determine call statistics and voice quality.
- IPv4 /IPv6 recognition
- RFC 2544 stress test 
- Checks cable on discontinuance, short- circuits, reverse polarity, cabling errors and determines cable length
- Automatic recognition of standard link, frame and traffic problems
- Network test by means of ping, trace route and hub activation. 

Technical Specifications

Network recognition

10 / 100 / 1000 Base-T

Display 

LCD-colour- display with touch screen
(320 x 240 x RGB)

Line tracing

yes

Port identification

yes

Network test

Ping, double IP addresses, response time, port-search- function (for hub or switch), availability, DHCP-server, MAC addresses, stress tests etc.

Jack

2 x RJ45
USB A USB B

Surrounding

Operation: 0° ... +45 °C
Storage: -10° ... +60 °C

Power Supply

lithium ion battery and A/C adapter

Dimensions

165 x 100 x 68 mm

Weight

610 g

LAN cable tester LanExpert: The network ports are at the top of the LAN cable tester whereas the correspondent ports for USB, network and power connection are at the bottom.

Here you can watch a screen shot of the packet analysis software included in delivery of  LAN cable tester LanExpert. It allows evaluating the logged data.

Delivery Content

1 x LanExpert, 1 x 1 GB USB stick (with enlgish handbook, firmware, pc controlling software (WireShark), 1 x charger, 1 x terminator (male/female), 2 x cable, 1 x storage bag and short instruction

Similar products to the LAN Cable Tester LanExpert:

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments

Below you will find an overview of the different product groups of scales and scales