Memory Oscilloscope PeakTech
PKT-1240
Memory Oscilloscope to capture peak- and average
value /
Autoset- / Autoscale- function / VGA-, USB-, LAN interface / PASS- / FAIL-
function /
10 mio. point storage / EN 61010-1, CAT II
|
The
memory oscilloscope PeakTech PKT-1240 of the most recent generation comes with a
high-resolution TFT-color display. The high resolution of the LC- display
allow the operator to read-out the measured curve very accurate. Through the
integrated background light, the measurements can be also performed at bad
lighting conditions. There are USB-, VGA- and LAN- interfaces integrated into
the memory oscilloscope PKT-1240, so that within a short range of time very
large data volumes can be transferred to the computer, an external monitor can
be connected and the data can be requested through the network wirelessly. The
memory oscilloscope PKT-1240 is equipped with an internal storage of 10 mio.
points per channel or 15 wave forms, whereas the measured values and graphics
can even be saved straight on a USB flash drive. The maximum band width of 60
MHz and the high sampling rate of 250 MSa/s (per channel) enables several
measurements in a broad application range. The memory oscilloscope is equipped
with 20 automatic measurement functions and the FFT- analysis. The Autoset- and
autoscale- functions of the memory oscilloscope assure a user friendly
operation. If there are any questions about this
Memory Oscilloscope PeakTech PKT-1240, please have a look at the technical specification
below or
call: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our technicians and engineers will gladly advise you in all oscilloscopes
and all products in the field of measuring
instruments, regulation
and control and scales.
|
|
|
-
High-resolution TFT-color-display (800 x 600)
- VGA-output for external monitor
- USB interface
- LAN connection
- PASS/FAIL function
|
-
Storage of 10 mio. points per channel
- Autoset-/Autoscale function
- Storage straight to USB flash drive contingent
- 20 auto - measurement modes and FFT function
- EN 61010-1; CAT II
|
Technical Specifications
|
Sampling
rate
|
Band
width
|
60
MHz
|
Display
|
20
cm, 8''
TFT (800 x 600 Pixel, 65536 colors)
|
Channels
|
2
CH
|
Measured
value capture
|
|
Sampling
rate per channel
|
250
MSa/s
|
Measurement
sequence
|
Normal,
Peak-Value, Average
|
Horizontal
sensitivity
|
Scale
range
|
5
ns - 100 s / div.
|
Measurement
range
|
0.5
Sa/s ... 250 MSa/s
|
Vertical
part
|
Vertical
sensitivity
|
2
mV - 10 V/div
|
Rise
time
|
<
5.8 ns
|
DC
accuracy
|
±3
%
|
Vertical
resolution
|
8
Bits (2 CH simultaneously)
|
Trigger
|
Trigger
type
|
Edge/
Video/ Pulse/ Slope
|
Trigger
mode
|
Auto,
normal single
|
Trigger
coupling
|
DC,
AC, LF, HF
|
Measurement
functions
|
Automatic
measurements
|
peak-peak,
cycle RMS, Vmax, Vmin, Vtop, Vbase, Vamp, overshoot, preshoot, rise time, fall
time, +width, -width, +duty, -duty, delay A→B (rising), delay A→B
(falling), frequency, period, min
|
Phase
difference
|
±
3 °
|
Data
Storage
|
Memory
function
|
max. 10,000,000 points per channel
|
General
Specifications
|
Interface
|
USB,
VGA, LAN
|
Voltage
Supply
|
100
- 240 V ACeff; 50/60 Hz
|
Dimensions
(W x H x D)
|
340
x 155 x 70 mm
|
Weight
|
1.8
kg
|
Delivery
Content
|
1
x Memory Oscilloscope PeakTech PKT-1240, 2 x BNC cables, 1 x USB cable,
1 x Software - CD (Windows 2000/XP/VISTA/7), 1 x power cable, 2 x probe head
with BNC connection, 1
x carry bag, 1 x instruction manual
|
Optional
Equipment
|
Battery package 7.4 V (model: battery 3)
|
|
|
Similar
products to the Memory Oscilloscope PeakTech PKT-1240: |