Mounting Wattmeter PCE-ND10
 Mounting wattmeter for permanent installation / Lighted 3.5 " display / 2 alarm outputs / impulse output / Modbus RTU interface / IP 656 front / phase recognition / 
measurement and display of power, voltage, power rating, efficiency factor, phase angle...

The mounting wattmeter PCE-ND10 measures all system parameters 3-phase. Electricity, voltage and power determination are an easy task for the mounting wattmeter PCE-ND10. The electricity measurement can be determined via the mounting wattmeter directly and 3-phase. But there is also the possibility of measuring higher currents by means of transducers in combination with the mounting wattmeter PCE-ND10. The voltage metering is performed directly up to 500 V (phase-to-phase) due to the connections at the mounting wattmeter. The mounting wattmeter PCE-ND10 is entirely designed for operation in 3-phase networks. All measured parameters are shown on a large, lighted display. Via the buttons placed at the front the user is enabled to scroll through the parameters and feed-in all relevant settings for the measurement via the mounting wattmeter. Furthermore the mounting wattmeter is equipped with alarm-relays which signalize an exceed or undershoot of the preset parameters. Due to the Modbus RTU interface of the mounting wattmeter the recorded values can be transferred. By means of the impulse output the mounting wattmeter PCE-ND10 can transfer the active energy to an energy meter/ electricity meter. The front of the mounting wattmeter PCE-ND10 is protected according to IP67. The mounting wattmeter is to be installed into switch panels. The extract measures 92 x 92 mm. The dimensions of the mounting wattmeter's front measure 96 x 96 mm. If there are any questions about this mounting wattmeter PCE-ND10, please have a look at the technical specification below or call: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our technicians and engineers will gladly advise you in all energy meters and all products in the field of measuring instruments, regulation and control and scales. 

- Extract from switch panel 92 x 92 mm
- Measuring: U, I, f, P, Q, S, PF...
- Feed-in through measuring voltage
- Alarm function 
- Recognition of false phase order

- Impulse output of active energy
- IP 65 front-sided
- lighted 3.5" LC display
- Simple installation
- RS485 Modbus interface

Technical Specifications

Measured indicator

Display range

Measuring range

Accuracy

Power In

1A

0.00 ... 1500 A

0.005 ... 1.2 A AC

± 0.2 % from range

5A

0.00 ... 60000 A

0.025 ... 6 A AC

Voltage L-N

230 V

0.0 ... 1.012 MV

195 ... 253 V AC

± 0.2 % from value

290 V

0.0 ... 1.200 MV

246 ... 300 V AC

Voltage L-L

400 V

0.0 ... 1.752 MV

340 ... 440 V

± 0.5 % from value

500 V

0.0 ... 2.000 MV

425 ... 520 V

Frequency

47.0 ... 63.0 Hz

47.0 ... 63.0 Hz

± 0.2 % from value

Active power

-9999 ... 9999 MW

-1.52 kW ...1.52 kW

± 0.5 % from range

Reactive power

-9999 ... 9999 Mvar

-1.52 ... 1.52 Mvar

± 0.5 % from range

Apparent power

0.00 VA ... 9999 MVA

1.0 VA ... 1.52 VA

± 0.5 % from range

Power factor PF

-1 ... 1

-1 ... 1

± 1 % from range

Tan φ

-1.2 ... 1.2

-1.2 ... 1.2

± 1 % from range

Cos φ

-1 ... 1

-1 ... 1

± 1 % from range

φ

-180 ... 180 °

-180 ... 180 °

± 0.5 % from range

Absorbed active energy

0 ... 99,999,999 kWh

± 0.5 % from range

Released active energy

0 ... 99,999,999 kWh

± 0.5 % from range

Absorbed reactive energy

0 ... 99,999,999 kWh

± 0.5 % from range

Released reactive energy

0 ... 99,999,999 kWh

± 0.5 % from range

THD

0 ... 100 %

± 5 % from range

General technical specifications

Relay output

2 outputs, max. 250 V AC/ 0.5 A

Impulse output active power

O/C (NPN), 
class A according to EN62053-31, 
voltage 18 ... 27 V, 
power 10 ... 27 mA

RS485 interface 

Modbus RTU 8N2 / 8E1 / 8 O1 / 8n1 
baud rate 4800 / 9600 / 19200 / 38400 bit/ s

Display

monochrome 3.5 " LCD, leighted

Supply voltage from L3

195 ... 253 V AC / 47 ... 62 Hz

246 ... 300 V AC / 47 ... 62 Hz

Surrounding conditions

-20 ... 55 °C / 25 ... 95 % rH

Storage conditions

- 30 ... 70 ° C / non-condensing

Electrical security

EN 61010-1

Dimensions

96 x 96 x 77 mm

Switch panel extract

92 x 92 mm

Weight

approx. 300 g

Protection type

IP65

Delivery content

1x mounting wattmeter PCE-ND10, 2 x connection clamps, 1 x instruction manual

Delivery of varieties:

PCE-ND10-1

Power input: 1 A
Voltage input: 230 V/ 400 V
without RS485 interface

PCE-ND10-2

Power input: 5 A
Voltage input: 230 V/ 400 V
without RS485 interface

PCE-ND10-3

Power input: 1 A
Voltage input: 230 V/ 400 V
with RS485 interface

PCE-ND10-4

Power input: 5 A
Voltage input: 230 V/ 400 V
with RS485 interface

PCE-ND10-5

Power input: 1 A
Voltage input: 290 V/ 500 V
without RS485 interface

PCE-ND10-6

Power input: 5 A
Voltage input: 290 V/ 500 V
without RS485 interface

PCE-ND10-7

Power input: 1 A
Voltage input: 230 V/ 400 V
with RS485 interface

PCE-ND10-8

Power input: 5 A
Voltage input: 290 V/ 500 V
with RS485 interface

Similar products to the Mounting Wattmeter PCE-ND10:

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments

Below you will find an overview of the different product groups of scales and scales