pH Measuring Device GMH 3530 pH
measuring device for pH, Redox, rH and temperature (pH, mV, mVH, rH and °C or °F)/ reliability of sensor evaluable/ in case of Redox the
hydrogen-system can be identified/ mobile utility/ IP 65 front
|
The
pH measuring device GMH 3530 is a simple pH, mV, mVH, rH and °C hand-held instrument. Depending on the electrode the measuring data can be shown and read on the LC-Display. The mobile battery-operation enables the pH
measuring device to be a necessary equipment for every beginner, technician and engineer to test swimming pools, sewage etc. The temperature can be calibrated manually or automatically through an optional
temperature sensor with a range between 0 and +105°C. Nearly every measuring sensor is in general only optional purchasable (except pH-electrode). These features enable the
pH measuring device to perform a quick and reliable pH-mV-mVH-rH-°C- measurement.
In addition the pH measuring device performs a three-point-calibration
automatically.
Attention: Electrodes are only optional and must be ordered explicit! Temperature display also in Fahrenheit! If there are any questions about the
pH measuring device GMH 3530 have a look at the
technical specification below or call: + 44 (0) 2380 98703
0. Our technicians and engineers will gladly advise you in pH
measuring device and all products in the field of measuring
instruments, regulation
and control and scales.
|
|
|
- Automatic conversion into hydrogen-system
in case of Redox
- Auto- or manual temperature compensation
- rH-Measuring
|
- Double-Index for pH / Redox and temperature
- Auto-detection of calibrate
- Evaluation of sensor quality
- Electrodes only optionally available
|
Technical
specification
|
Measuring
range
|
Temperature:
- 100 ... + 250 ºC
- 148 ... + 482 ºF
pH: 0 ... 14 pH
Redox (ORP): -1999 ... + 2000 mV
Hydrogen system (DIN38404): - 1792 ... + 2207 mVH
rH: 0 ... + 70 rH
|
Accuracy
(at 25 ºC)
|
Device:
± 1 digit
Temperature: ± 0.2 ºC (from -20 ... +80 ºC) otherwise ± 0.4 ºC
pH: ± 0.01 pH
Redox (ORP) ± 0.1 % v.E. (mV/mVH)
rH: ± 0.1 rH
|
Sensor Input
|
1 m
|
Input impedance
|
10 TΩ
|
Display
|
Cinch
|
Operating temperature
|
3 mole/l KCL
|
Storage temperature
|
refillable
|
Voltage 9 V battery
|
Turn-screws (temperature, pH 7 or any other)
|
Measures
|
0 … +
45 °C
|
Enclosure
|
3 ½ digit, 13 mm height
|
Weight
|
9 V Battery
|
Delivery
content
|
1 x pH
measuring device GMH 3530 (without electrode), 1 x battery, 1 x instruction manual
Optional Equipment: Temperature sensor (150 mm Peak, Ø3 mm, 90 mm grip, 1000 cable, BNC-Socket
Calibration-Set for pH
|
|
pH-electrode for liquids
|
|
Redox-electrode for liquids
|
|
pH-Incision Sensor for groceries
|
|
pH-electrode with integrated Pt100-Temperature Sensor
|
|
|
|
Here you will find an overview of all the measuring instruments available at PCE Instruments. |
Contact: PCE Instruments UK Limited Unit 11 Southpoint Business Park Ensign Way, Southampton United Kingdom, SO31 4RF Phone. +44 ( 0 ) 2380 98703 0 Fax +44 ( 0 ) 2380 98703 0 |