PAT Tester Safetytest 1L
Safetytest according to PAT 0701/0702/ with internal memory of 16.000 values / alphanumeric buttons / RS232 and USB interface / supervision

The safety tester Pat 1L is a measuring device to control devices according to DIN PAT 070-0702. The detection will be done via two sockets. The technician will get an advice on the LCD display. This ensures an easy and secure process. Vie two LEDs, after measurements an evaluation will be made. In the internal memory of the safety tester Pat 1L, 32 customers and 16,000 journals can be stored. With the RS-232 and USB interface data can be transmitted to a PC or Laptop. Furthermore the device is able to be controlled remotely. To identify an examinee really easy and fast, a barcode reader and radio transponder reader can be attached. With additional equipment three phase extension cable can be determined. Also installed examinees can be controlled vie optional clamp meters. This safety tester Pat 1L is placed in a hard and safe casing. Therefore it is suitable for outdoor tests. If you have further questions concerning the Pat tester Safetytest 1l, please take a look at the following technical data or call our hotline: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our technicians and engineers will gladly inform you concerning the Pat tester or any other products in terms of regulation and control or scales and balances by PCE Instruments.

- Tests according to DIN PAT 0701-0702
- Tests will be done via two sockets
- Measurement of devices with termination of
  clamp meters
- Manual description via advices
- Automatic switch off

- Barcode and transponder reader via RS 232,
  directly connectable 
- Real time clock and memory for up to 16,000
  measurements
- Display of real values/effective values
- Control of electric supply
- good-bad-rating via LEDs

Technical specification

Electric supply

230V AC ± 10 %

Examinee interface

16A Schuko

Operational and environmental temperature

0 ... 14 °C

Operating error

1 % of range + 5 % of measurement value

Protective resistance

Range

R-PE 4,000 Ω

Measuring conditions

U0 = 6 VDC, IK 200 mA

Isolation resistance

Range

R-ISO 20,00 MΩ

Measuring conditions

UN: 500 V, 1000 V DC; IK 1,5 mA

Alternative leakage current

Range

I-EA 40 mA

Measuring conditions

U0: 230 VAC

Differential current

Range

I-Diff 40 mA

Measuring conditions

Filter characteristics according to DIN PAT 0404 for correct rating of harmonics.

Operating current

Range

I-ABL 4 mA

Voltage

0,0 ... 260,0 V

Electricity

0,00 ... 20,00 A

Power total

0 ... 4000W. acquisition up to the 15th harmonic

Conductor monitoring

Voltage: N-PE > 30 V
Integrated residual current turn-off:
Differential current > ca. 20 mA

Clamp measurement

Gearing transmission

2000:1

Differential current

00,00 ... 40,00 mA

Current measurement

00,00 ... 40,00 A

Testing process

Standards

DIN PAT 0701-0702
SKI active / passive (with or without mains)
SKII
Fixed network connection
Extension cable
Single measurement

Interfaces

RS232 for PC, barcode reader, transponder
reader, USB for PC

Memory, clock

ca. 16000 measurement protocols for
max. 32 customers with date and time stamp

Dimensions

100 x 195 x 40 mm

Weight

500 g

The Pat Tester during the repeat testing of electrical equipment

The Pat Tester Safetytest 1L in a robust case

Delivery content

1x handheld PAT tester safetytest 1L, 1 x sensor, 1 x manual description on CD,
1 x report software safetydoch DEMO

Additional Equipment

- ISO calibration certificate
- Test probes 4mm black
- Brush probe 4 mm black
- VLCEE32 adaptor to control CEE 32
- VLCEE16 adaptor to control CEE 16
- VLS adaptor to check isolated ground
  receptacle
- TCEE32 adaptor to measure differential current
  on 32A examinees
- TCEE16 adaptor to measure differential current
  on 16A examinees
- Bar code scanner
- Bar code printer
- Software "Safetydoc"
- Software Safety-Remote

The clear user interface of the Pat Tester
ensures fast and secure working



The display shows all relevant information
and clear text directions

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments

Below you will find an overview of the different product groups of scales and scales