Force Meter 833-series
Force meter to measure pressure/ customized for permanent application / 
model dependant measurements of 0 N…400 kN/ 
gauge with zero correction (measured value display of force in kilonewton [kNt])

The force meter of the 833 series is optimized for long-term application at machines, systems and constructions. Therefore the force meter is made to monitor and regulate such components. It allows simply the force absorption and its visualisation due to the large instrument dial. The size of the measuring clock counts 100 nm, is designed to allow an exact meter reading quickly and at one glance. The emerging force is initially absorbed by the force meter and then transferred immediately to the measuring clock, which is equipped with a zero correction and displays accurately the measured force. Depending on the respective model of the 833 series thus forces between 0 and 400,000 N can be measured. The instrument dial contains a scale that provides the measuring value in kN. The fact that the measuring device is made of stainless steel allows an application in humid as well as dry environment. In case there have to be performed maintenances and adjusting measuring with this force meter, we recommend several other force gauges in our assortment that are more adequate. For further information about the portable force meter of the 833 series, please read the following technical data or call our Hotline: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. You can also reach us through our contact form. Our engineers and technicians will gladly advise you regarding the portable force meter of the 833 series or any product in terms of measuring instruments, regulation and control, or scales and balances of PCE Instruments.

- Measuring range 0 N…400 kN (model specific)
- For regulation and monitoring of constructions
- Made of stainless steel
- Display in kilo Newton

- Hydraulic measuring principle
- Device for stationary application
- Applicable for long-term application at machines
- Large caliber for simple reading

Technical data of measuring transducer

Model

Nominal load

Force meter 833-2.5kN

0 ... 2,500 N

Force meter 833-4kN

0 ... 4,000 N

Force meter 833-6.3kN

0 ... 6,300 N

Force meter 833-10kN

0 ... 10,000 N

Force meter 833-16kN

0 ... 16,000 N

Force meter 833-25kN

0 ... 25,000 N

Force meter 833-40kN

0 ... 40,000 N

Force meter 833-63kN

0 ... 63,000 N

Force meter 833-100kN

0 ... 100,000 N

Force meter 833-160kN

0 ... 160,000 N

Force meter 833-250kN

0 ... 250,000 N

Force meter 833-400kN

0 ... 400,000 N

General technical specification about all models of the force meter

Measuring inaccuracy

≤ ± 1.5 %

Operation temperature

0 °C…+50 °C

Borehole number

2.180 ° shifted

Dimensions of measuring meter 833 series

Here our force gauge is shown with its dimensions

Delivery content of force gauge 833 series

1 x force gauge, 1 x instruction manual

In the following, you will find more force meter:

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments

Below you will find an overview of the different product groups of scales and scales