Preload Force Tester PCE-VKM-series Mobile preload force tester for all 50 mm straps / traction force tester to control preload force / clamping force with easy handling and good readability
|
With the Preload Force Tester PCE-VKM-series a clamping force tester has been developed that revolutionize the market. Finally, the meaning of preload force for lashing down through preload force tester will be clear to any user. The user just needs a measuring instrument (preload force tester) for any number of overloads on a vehicle. With just one preload force tester the preload on both sides of the vehicle can be measured every time. The proven preload of the preload force tester can be applied in calculations. Thus, lashing straps can be saved and costs can be saved. The clamping force tester is also available as set in a practical storage case made by aluminium. Additionally, the load restraining calculation disk Truckers Disc is included. With this disc required load securing for lashing down as well as for lashing diagonally. The lashing capacity of the useable lashing strap is the force that can be initiated in straight pull in the lashing strap at a maximum. The lashing capacity is abbreviated to LC. Values will be presented in the unit daN. An overview of all force gauges can be found here: preload force testers. Our technicians and engineers will be happy to help you with this force gauge and all other products in the field of measuring instruments, regulation and control and scales.
|
|
|
- Easy operation - For lashing straps
acc. to DIN EN 12195-2 - Appropriate handling
|
- For all 50 mm straps - Very gentle to surface - Also available in casing set
|
Technical Specifications
|
Measuring area
|
0 … 1,000 daN |
Strap width
|
50 mm
|
Standard
|
lashing strap according to DIN EN 12195-2
|
Models
|
Preload Force Tester PCE-VKM 1 in chromatic design.
|
Preload Force Tester PCE-VKM 1 in stainless steel design.
|
Preload Force Tester PCE-VKM 1 in casing and chromatic design.
|
Preload Force Tester PCE-VKM 1 in casing and stainless steel design.
|
Delivery Content 1x Preload Force Tester PCE-VKM-series (PKM-VKM 11 and PCE-VKM 21 in aluminium case)
|
|
|
Here you will find all the measuring instruments available at PCE Instruments
|
Contact: PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39
|
Contact: PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714
|