Recording Oscilloscope
PKT-1245
2-Channel Recording Oscilloscope
with color-display / Autoset- / Autoscale- function
/ VGA-, USB-, LAN interface / digital (8") TFT display with
background lights /
PASS- / FAIL-
function / 10 mio. point storage / EN 61010-1, CAT II
|
The
recording oscilloscope PKT-1245 is equipped with various high-capacity functions
and thus allows a multi-purpose application in industry and research. The
digital display allows an easy read-out. The integrated background lights at the
recording oscilloscope facilitate the readout at the recording oscilloscope
significantly. The embedded display is a high-resolution TFT- display with 800 x
600 image points and 65536 pixel. The large band width and measuring rate of the
recording oscilloscope allow a high flexibility. Furthermore the recording
oscilloscope is equipped with several interfaces that facilitate connecting the
device with a computer or another device, which allows an easier operation.
Besides the USB interface, the recording oscilloscope also features a VGA connection
enabling to build a LAN connection. By means of the VGA connection an external
monitor can be connected to the device in order to display the measurements very
clear. The LAN interface of the recording oscilloscope allows furthermore a
remote access to the measurement data via network. Thus measurements can be
performed at another site, while their evaluation is performed somewhere else.
The advantage of such a USB interface installed at a recording oscilloscope is
that the measured data can even be saved straightly at a USB flash drive. That
allows a readout later on and the analysis of the measured data afterwards at a
computer. In order to utilize these functions as good as possible, the recording
oscilloscope has a large delivery content, which also include the required data
cable. If there are any questions about this
Recording Oscilloscope PeakTech PKT-1245, please have a look at the technical specification
below or
call: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our technicians and engineers will gladly advise you in all oscilloscopes
and all products in the field of measuring
instruments, regulation
and control and scales.
|
|
|
-
USB-, LAN, VGA interface
- 100 MHz band width
- 20 automatic measurement modes
|
-
Autoset- and autoscale- function
- Safety: EN 61010-1; CAT II
- Delivered with power-, USB-, BNC- cable
|
Technical Specifications
|
Measured
value capture
|
|
Sampling
rate per channel
|
500
MSa/s
|
Measurement
sequence
|
Normal,
Peak-Value, Average-Value
|
Input
|
|
Input
coupling
|
AC
/DC/ GND
|
Input
resistance
|
1
MΩ +/- 2 % in parallel with 15 pF +/- 5 pF
|
Max.
input voltage
|
400
V DC or ACss
|
Horizontal
sensitivity
|
Scale
range
|
2
ns ... 100 s/div
|
Measurement
range
|
0.5
Sa/s ... 250 MSa/s
|
Vertical
part
|
Vertical
sensitivity
|
2
mV - 10 V/div
|
Rise
time
|
<
3.5 ns
|
DC
accuracy
|
±3
%
|
Vertical
resolution
|
8
Bits (2 CH simultaneously)
|
Trigger
|
Trigger
type
|
Edge/
Video/ Pulse/ Slope
|
Trigger
mode
|
Auto,
normal single
|
Trigger
coupling
|
DC,
AC, LF, HF
|
Measurement
functions
|
Automatic
measurements
|
peak-peak,
cycle RMS, Vmax, Vmin, Vtop, Vbase, Vamp, overshoot, preshoot, rise time, fall
time, +width, -width, +duty, -duty, delay A→B (rising), delay A→B
(falling), frequency, period, min
|
Phase
difference
|
±
3 °
|
General
Specifications
|
Band
width
|
100
MHz
|
Display
|
20
cm (8") TFT with 65536 colors
|
Resolution
|
800
x 600 pixel
|
Channels
|
2
CH
|
Interface
|
USB,
VGA, LAN
|
Voltage
Supply
|
100
- 240 V ACeff; 50/60 Hz
|
Dimensions
(W x H x D)
|
340
x 155 x 70 mm
|
Weight
|
1.8
kg
|
Delivery
Content
|
1
x Recording Oscilloscope PeakTech PKT-1245, 2 x BNC cables, 1 x USB cable,
1 x Software - CD (Windows 2000/XP/VISTA/7), 1 x power cable, 2 x probe heads, 1
x carry bag, 1 x instruction manual
|
Optional
Equipment
|
Battery package 7.4 V (model: battery 3)
|
|
|
Similar
products to the Recording Oscilloscope PeakTech PKT-1245: |