Short-Circuit
Measuring Adapter SCU 1000
Short-circuit measuring adapter for measurements of solar of solar systems/ max. 1000 V and 20 A DC
|
The short-circuit measuring adapter SCU 1000 allows safe measurements of solar systems. In addition to the voltage- and the short-circuit measurement the short circuit measuring adapter allows the measurement of the insulation resistance, too. The short-circuit measuring adapter is the basis for the safe operation of photovoltaic systems, because you need safe measuring values. With the short-circuit measurement adapter SCU 1000 the tester can short-circuit the photovoltaic system safe. Arcs, which occur due to high voltages, are avoided with this short-circuit measurement adapter. The short-circuit measurement adapter is equipped with a high quality DC load break switch. With this short-circuit measuring adapter and the current clamp
PCE-DC3, the short circuit current of a solar energy system can be easily measured. Furthermore after the short-circuit with the short-circuit measuring adapter SCU 1000
and the PCE-IT100
can be carried out an insulation testing. The short-circuit measurement adapter tolerate this short-circuit currents up to 20A and voltages up to 1000 V. In the scope of supply there is not only the short-circuit measuring adapter but also measuring cables and solar plugs, which allow the connection with the solar system easily.
If you can not find the short-circuit measuring adapter you are looking for,
please contact us and we will help you find the best solution to suit your needs
by calling our offices on: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703
and our technical staff will advise you regarding our measuring
instruments. Our engineers and technicians will be happy to help you with
the short-circuit measuring adapters, and of course, with the other products in
the field of regulation
and control, and scales
and balances of PCE
Instruments.
|
|
|
- For measurements in DIN EN 62446
- Enables simple short-circuit measuring adapter
- Up to 1000 V DC
|
- Up to max. 20 A DC load
- High quality DC load break switches
- Help with insulation resistance measurement
|
Specifications
Short-Circuit Measuring Adapter
|
Open-circuit voltage
|
0 ... 10% salt (by weight)
|
Short-circuit current
|
± 0.2% in the range 0 ... 3%
± 0.5% in 3 ... 10%
|
Insulation test voltage
|
0.01%
|
Protection
|
0 ... 50 ° C
|
Dimensions
|
0 ... 50 ° C
|
Weight
|
21.5 mm high LCD
|
Security
|
208 x 110 x 34 mm
|
Delivery
Content
|
1 x short-circuit measuring adapter SCU 1000, 4 x 1 meter test leads (red / blue), 4x Solar Adapter, 1x manual
|
Optional
Accessories
|
Current clamp PCE-DC3
If you combine the current clamp PCE-DC3 with the short-circuit measuring adapter SCU 1000, you can carry out measurement of the short-circuit current of a PV system. The resolution is in the range below two amps 1 mA. Higher currents are displayed at a resolution of 100 mA.
|
|
Multimeter PCE-DM 32
To check the polarity and open circuit voltage, the short-circuit measuring adapters can be used together with a multimeter. The PV system and the meter can be connected in parallel to the short-circuit measurement adapter. Helpful are the included adapters and test leads.
|
|
Insulation
Meter PCE-IT 100
If the PV-installation is shorted the measurement from EN 62446 of the
insulation resistance is implemented. This can be done with the short measuring
adapter. With the PCE-IT 100 you can measure the insulation
resistance.
|
|
|
|
In the following, you can see more products in the field of "Short-circuit Measuring Adapter": |
|
Here you will find an overview of all the measuring instruments available at PCE Instruments.
|
Contact: PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39
|
Contact: PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714
|