Stethoscope STE- 3
Stethoscope for use during maintenance and service/ volume regulation/ operates with use of a piezo-transducer/ allows accurate localisation of irregular sounds/ delivered with headphones
|
The stethoscope operates by using a piezo-transducer that detects even the quietest sound. The large calliper at the stethoscope is designed for digital volume control in 32 steps, in order to regulate the recorded sounds in their volume. The selected volume is shown via three light diodes. The headphone of the stethoscope is equipped with two adjustable ear taps, to which a cable of 2 m length is added. Electronic stethoscope made for acoustic engine diagnosis. With this stethoscope defects can be detected or at least narrowed down without stripping down the construction part (engine).
The measuring tip of the stethoscope is therefore held near the motor block, the gear or any other construction part. Possible sounds from the inner life of the engine / construction part will be amplified and due to the head phones recognizable without any distracting surrounding sounds. The sound volume of the head phones is adjustable at the stethoscope. Thus damages due false storage can be recognized at a very early stage and higher subsequent loss can be avoided. Is there an irregular sound from the engine? With the stethoscope these sounds can be easily detected. For further diagnosis of errors a lot of experience is required as well. But whether there is an irregularity or not, can be easily detected by every beginner. The stethoscope will be delivered with headphones and measuring tips as well as a sable plastic case.
Here you will find another stethoscope model. For further information about the
stethoscope STE-3, please read the following technical data or call our Hotline:
UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our engineers and technicians will gladly help you with the
STE-3 stethoscope or any other product in the field of
regulation and control or
scales and balances of PCE Instruments.
|
|
|
-
A user friendly device, easy to handle
- Due to a 32 staged digital regulation the desired
volume can be adjusted
- The excellent volume quality helps detecting
reliably possible sources of sounds
|
- The device will be delivered with two measuring
sensors, 70 and 300 nm, due to which nearly
every spot is reachable
- Due to its light ergonomic design the device can
be comfortably handled with one hand
|
Technical
Specification
|
Frequency range
|
30 Hz...15 kHz
|
Sound volume
|
adjustable
|
Speaker
|
8W
|
Voltage supply
|
4 x 1.5 V AAA batteries (incl.) for approx. 30 hrs. operation time
|
Enclosure
|
ABS
|
Surrounding temperature
|
0 ... 45
ºC
|
Dimensions
|
Device: 300 x 40 x 40 mm
Nail sensor (removable): 1 x 300 mm; 1 x 70 mm (length)
|
Sensor material
|
steel
|
Weight
|
240 g (battery incl.)
|
Delivery
content
|
1 x stethoscope STE-3, 1 x
head phones, 1 x 70 mm sensor, 1 x 300mm sensor, 1 x battery, 1 x transportation case, 1 x instruction manual
|
|
|
Here
you will find further products regarding 'stethoscope'
|
Here you will find an overview of all the measuring instruments available at PCE Instruments. |
Contact: PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39
|
Contact: PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714
|