Tablet-Oscilloscope PCE-OC 4
Tablet-Oscilloscope with a 10 " LCD / 100 mHz / internal storage / 
multiple measurement modes / adjustable Trigger / 2 inputs / 
light measuring instrument

The tablet-oscilloscope is a portable instrument with a large LCD. The fact that it possesses a band width of 100 mHz shows that it is made for many applications. The tablet-oscilloscope can specially be used for the most modern methods in the measurement- and test engineering. The sample rate is max. 1 GS/s. In addition to that the tablet-oscilloscope has two inputs which can be used to measure as well as to trigger. The navigation and operation of the tablet-oscilloscope is completely made with the touchscreen. The compact design and small weight makes it easy to use the table-oscilloscope as a non-stationary device which can easily be transported anywhere you need it. 

The USB-interface makes it possible to connect the tablet-oscilloscope to a computer in order to read out the measured data. If there should be no opportunity to use a computer you can easily make screenshots of the measurements and store them on the tablet-oscilloscope directly and make the readout afterwards. The automatic-function allows you to make measurements without changing any settings. 

If there are any questions about this tablet-oscilloscope PCE-OC 4, please have a look at the technical specification below or call: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our technicians and engineers will gladly advise you in all oscilloscopes and all products in the field of measuring instruments, laboratory equipment, regulation and control and scales. 

- Auto-set function
- USB-interface
- Single shot
- 10,1 " LCD

- 100 MHz bandwidth
- 2 input channels
- Adjustable trigger
- Different measurement modes

Technical specification of the tablet-oscilloscope PCE-OC 4

Bandwidth

100 MHz

Sample rate

2 GS/s

Inputs

2

Input coupling

AC, DC, GND

Input impedance

1 MΩ ±1 %, 15 pF ±3 pF / 50 Ω (adjustable)
or 50 Ω (adjustable)

Maximal input voltage

CAT 1 300 V (1 MΩ) / 5 V (50 Ω)

Probe ratio

0,1 x ... 1000 kx

Vertical component

Sensitivity

2 mV/div ... 5 mV/div

Resolution

8 bit

Mathematical functions

+, -, *, /, FFT

Offset range

±6 div

Horizontal component

Time base

1 ns/div ... 1000 s/div

Memory

90 Mpts (1-channel)
45 Mpts (2-channel)

Sampling rate 1-channel measurement

2 G Sa/s

Sampling rate 2-channel measurement

1 G Sa/s

Trigger

Trigger signal

Edge-, logic- and pulsed trigger

Trigger source

CH 1, CH 2

Trigger types

Normal, Single, Auto

Automatic measurements

Period, frequency, rise time, fall time, delay-trigger, pulse width, duty cycle, overshoot, max-/min-function, peak-to-peak, effective value, effective value (cycle), mean value, cycle mean value, amplitude, burst-period, high-low-level (max. 5 simultanously)

General technical specification of the tablet-oscilloscope PCE-OC 4

Display

10,1 " LCD 

Resolution

1024 x 600

Ambient conditions

-20 ... +50 °C, <95 % RH

Power supply

100 ... 240 V, 50 ... 60 Hz

Power consumption

≤15 W

Battery capacity

13000 mAh

Charging time

≤5 h

Dimensions

275 x 210 x 60 mm

Weight

2000 g

More pictures of the tablet-oscilloscope PCE-OC 4

Here you can see the different inputs of the tablet-oscilloscope.

The tablet-oscilloscope comes with foot which can be folded out. 

Delivery Content of the tablet-oscilloscope PCE-OC 4

1 x Tablet-Oscilloscope PCE-OC 4, 2 x probe, 1 x 1,5 V test adaptor, 1 x power supply unit,
1 x user manual

Similar products to the Tablet-Oscilloscope PCE-OC 4:

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714