Axle Scale PCE-DPW 1 Axle
Scale for motor vehicles / automatic weighing while vehicle drives through
/
large weighing surface for large tires / quick determination of
transported load
|
The
axle scale PCE-DPW 1 is a traversable scale, which can weigh any vehicle
axle-wise while it is traversing the scale. It is a low-cost option to weigh
vans, trucks, tractors and any other vehicle without exception. The scale
calculates the vehicle's total weight automatically by summing the axle loads.
Thus no additional personnel is required for an operation with the axle scale
PCE-DPW 1. The computer software automatically protocols the data of the whole
weighing process and by automatically registering the weighing process and the
driving direction, the axle scale can determine the transported load as well.
The axle scale PCE-DPW 1 further supports statistical weighing, as the software
features a separate weighing mode for that. The axle scale PCE-DPW 1 has to be
set into a fundament. The delivery includes detailed instructions and maps for
the installation. In addition the platform of the axle scale features a
photoelectric relay system. Thus the driving direction, speed, size of the tire,
axle diameters and overlapping of the axles can be recognized automatically.
Thus the axle scale proves to be a reliable device to weigh any vehicle. If there are any questions about this
Axle Scale PCE-DPW 1 please
have a look at the technical specification below or call:
UK customers +44(0) 23 809 870 30 /
US customers +1-410-387-7703. Our technicians and engineers will gladly
advise you regarding all axle
scales and all products in the field of measuring
instruments, regulation
and control and scales.
|
|
|
-
Robust and practical
- Documentation of weighing
- Weight determination whilst traversing
|
-
Ideal, to determine the transport capacity
- Controlled by computer - software
- Software in 6 languages
|
Technical
Specifications of the Axle Scale PCE-DPW 1
|
Max.
weighing range |
15,000
kg / 15 t per axle |
Resolution |
10
kg |
Measurement
inaccuracy |
±
40 kg |
Platform
size |
3200
x 1000 mm
Optional extendable to 3400 mm |
Platform
construction |
galvanized
steel |
Weighing
cells |
4x
10t IP68 shear force weighing cell
150% overload safety (15 t) |
Analysis
unit |
multilingual
computer software incl. data storage |
Connection
between analysis unit and platform |
10
m for data transfer and power supply, optional extendable up to 100 m |
Surrounding
conditions |
Operation
temperature: - 35 °C ... + 65 °C
Temperature compensation: - 10 °C ... + 40 °C |
Due to the large platform even agricultural vehicles with larger tires fit
onto the axle scale PCE-DPW 1
|
Due to the sensors that are installed inside the platform, it can determine
automatically the number of axles and the total weight. |
Features
of the computer software |
|
-
Administration and controlling of the used construction parts and equipment |
-
Data administration for addresses, articles, vehicles with empty load, and
allocations |
-
Generating manual transmitters with assignment of pre-settings |
-
Indication of weight and state for light beam and signal lights |
-
Recording weighing process / time, date, driving direction, speed and all
weights |
-
3 weighing modes: dynamic, statistical and manually |
-
List of weighing with filter- and sorting function |
-
Quality control of weighing via driving speed and statistical function |
-
Quality control of weighing process via driving speed and statistical function |
-
Graphic of weighing diagram of every axle with all measurement points |
-
Display of live image recorded on the camera and the images in data memory |
-
Administration of pre-settings for weighing |
-
Subsequent processing of the weighing results |
-
Administration of dry mass |
-
Generate and print weighing sheets and certificates |
-
Integrated table designer for all evaluations |
-
Data export in Excel or other formats |
-
Data memory and data restoration |
-
Maintenance tool for web support |
|
Delivery
Content |
1 x Axle Sclae PCE-DPW 1 consisting
of: 1 x weighing platform with electronic's box (without installation frame),
1 x weighing technology and feet, 4 x edge protector elements to set the
edges in cement, 4 x bearing plates, 2 of those with welded rings, 12 x anchor
bolts for cement with equipment for installation to level the support blocks, 10
m cable for connection to computer via plug and adapter, 1 x USB RS-232
converter, 1 x axle load scales software CD, 1 x manual with map of fundament
and armoring, 1 x instruction manual
|
Optional
Equipment of the Axle Scale PCE-DPW 1
|
Installation
frame for ground installation
The
galvanized C-profile installation frame is made for the support of the hole's
edges. Thus you can avoid that some fractures of the surrounding material
might penetrate the axle scale and thus lead to inaccurate weighing results.
Depending on the platform size, we offer two different frame sizes for the
various frame sizes.
Art.-Nr.: AW04022 size: 3.5 x 1.3 x 0.3 m
Art.-Nr.: AW04024 size: 3.7 x 1.3 x 0.3 m
|
|
Extensions
of the axle scale The
axle scale features a standard size of 3200 x 1000 mm. This size can be
extended to 3400 x 1000 mm. The extension cannot be installed
subsequently and should therefore be considered at the time of the order.
Should you need a frame for the installation, you should watch the size
then.
Art.-Nr.: AW000125
|
|
Connecting
cable for axle scale
The
cable for maintaining a connection between platform and analysis software,
that is included in delivery has only a length of 10 m. If you wish to
maintain a connection over a larger distance, you can order an extended cable
up to 100 m.
Art.-Nr. WE-K-LIYCY-5-0.34
|
|
Large
display for axle scale
The
optional large display of the axle scale allows due to a 125 mm LED display an
easier read of the weighing results from a distance of even 100 m. The large
display does not only indicate the weighing results but also other
information: e.g. whether the axle scale is ready for weighing, any errors and
the allocation number for allocated weighing. The cable length can vary.
Art.-Nr.: AW00230 Display
Art.-Nr.: WE-K-LIYCY-2-0.5 cable length
|
|
Monitoring
lights for the axle scale
The
two lights indicate the state of the axle scale. Red means the axle scale is
not jet ready for weighing and green means the weighing process can be
performed, so the vehicle can be driven onto the scale. This solution is ideal
for every user, whether he uses the axle scale for the time, since the
operation is self-explanatory and easy. If you use a radio transmitter, the
lights indicate whether the allocation number of the weighing process is
right. The cable length is varying.
Art.-Nr.: AW00250 monitoring lights
Art.-Nr.: WE-K-YSLY-JZ-4-0.75 cable length
|
|
Monitoring
camera for the axle scale
This
camera supports various settings and can be used for recording images or
videos of the vehicles, that traverse the scale. Those can then be allocated
to the relevant weighing and function as monitoring instruments. The cable
length is variable (max. 100 m)
Art.-Nr.: AW00240 monitoring camera
Art.-Nr.: VIZ02020 cable length
|
|
Radio
receiver for axle scale
This
radio receiver can due to the optional radio transmitters (AW0026011)
receive their transmitted identification number. Thus the axle scale can
automatically allocate the vehicles to the measurement data, like e.g.
empty weight, article number, customer and deliverer.
Art.-Nr.: AW00260
|
|
Radio
transmitter for the axle scale
With
this simple radio transmitter the vehicle approaching the scale can be
registered. Thus the axle scale system can access the data storage and the
weighing data automatically.
Art.-Nr. AW0026010
|
|
12
keys radio transmitter for the axle scale
This
radio transmitter allows the driver of the vehicle to log into the axle scale.
Thus the axle scale can access its memory and retrieve any previously set data
on this particular weighing. Thus the weighing data can be allocated to the
data that is already existing. Therefore the radio receiver AW00260
must be installed at the scale. The 12 keys of the radio transmitter are meant
for feeding in any additional data, that is required for distinction. Example:
The same vehicle is weighed with various articles each time. For a correct
data care not only the vehicle data (empty weight) but also the article number
or the customer number needs to be fed-in.
Art.-Nr. AW0026011
|
|
|
|
Similar
products to the Axle Scale: |
-
Axle Scale RW series
(10 t per wheel, resolution above 2 kg, 20 h
battery operation, max. 6 platforms)
|
|
-
Axle Scale PCE-CWC series
(for axle-, coupling- and total load, up to 1.500 kg/wheel,
coupling load max.150 kg)
|
|
|
Here you will find an overview of all the balances available from PCE Instruments. |
Contact: PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39
|
Contact: PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714
|
This page in German
in Italian
in Spanish
in Croatian
in French
in Russian in Hungarian in Turkish in Polish in Dutch
in Portuguese
|