Low-Frequency-Analyzer ME3851A
Low-Frequency-Analyzer up to 100 kHz / for electrical and magnetic alternating fields / different filter available / for professional NF-measurements / Geiger-counter- effect

The low-frequency-analyzer ME3851A is used for measurements concerning electric smog in the sector of building biologists. With the aid of the low-frequency-analyzer, building biologists can detect electromagnetic fields. The frequency range lies between 5 Hz and 100 kHz. This low-frequency-analyzer has been developed for the introduction to AF- measurements technology. Besides the presentation of the low frequented alternating field on the display, the low-frequency-analyzer gives an audio signal. The so-called Geiger-counter-effect helps the user identifying strong distribution sources. The frequency range of the low-frequency-analyzer ME3851A reaches from 0,1 V/m to 1999 V/m. Next to the measurement of alternating electric fields, the low-frequency-analyzer is applied to determine alternating magnetic fields. If you have further questions concerning the low-frequency-analyzer, take a look at the following technical data or call our hotline: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703. Our technicians and engineers would be pleased to inform you concerning the low-frequency-analyzer and all other products in terms of regulation and control or scales and balances of PCE Instruments.

- Frequency range up to 100 kHz
- Measurement range up to 1999 V/m
- Geiger-counter-effect
- AC / DC output

- For magnetic and electric fields
- For building biologists
- Battery operation
- Different filter available

Technical specification of the Low-Frequency-Analyzer ME3851A

Frequency range

5 Hz ... 100 kHz

Sensor type

E-field sensor for electric NF-fields
H-field sensor for magnetic NF-fields

Measurement range

Magnetic flux density: 0,1 ... 1999 nT
Electric flux density: 0,1 ... 1999 V/m

Accuracy (depending on frequency)

± 2 %, ± 7 digit (50 / 60 Hz)

Audio analysis

audio signal proportional to the field strength
(with "geiger-counter-effect", shiftable)

Signal rating

RMS

Signal Output

AC / DC

Filter

16 Hz bandpass
50 Hz highpass
2 kHz lowpass

Power supply

9-volt NiHMN-battery
Low-batt.-display, Auto-Power-Off-Function
Adapter and recharger (within delivery content)

Average running time

8 hours

Weight

ca. 1150 g

Delivery content

1 x low-frequency-analyzer ME3851A, 1 x 9 V NiHMN battery, 1 x highly flexible ground cable, 1 x ground clamp, 1 x adapter and recharger, 1 x instruction for use

In the following, you can see more low-frequency-analyzer:

Here you will find an overview of all the measuring instruments available at PCE Instruments.

Contact:
PCE Instruments UK Limited
Unit 11 Southpoint Business Park
Ensign Way, Southampton
United Kingdom, SO31 4RF
Phone: +44(0) 23 809 870 30
Fax: +44(0) 23 809 870 39

Contact:
PCE Americas Inc.
1201 Jupiter Park Drive, Suite 8
Jupiter 33458 FL
USA
Phone: +1-410-387-7703
Fax: +1-410-387-7714

Below you will find an overview of the different product groups of measuring instruments

Below you will find an overview of the different product groups of scales and scales