Precaution Meters
Here, you will find precaution meters to perform safety tests und inspections on protection measures of electric devices and equipment according to the German guidelines DIN VDE 701-702 and BGV A3. According to DIN VDE 701-702, electric operating resources have to be tested via a precaution meter in regular intervals as well as after every modification and maintenance. By means of our precaution meters these acquired inspections are easily performable. Amongst other things, the inspection of protective ground resistance, the insulation resistance, the stay current and the equivalent stay current can be performed and it can be checked whether there is no power. The protective ground resistance can be inspected through a short-circuit current of 250 mA; inspection via the residual current method can only be partially performed with this precaution meter. Our precaution meter achieves the IEC-1010-1 standards and is TÜV and GS approved. Additionally, an integrated RS-232 or USB interface allows the measuring data to be transferred to a PC. If you don't find the precaution meters you are looking for, please contact us and we will help you find the best solution to suit your needs by calling our offices on: UK customers +44(0) 23 809 870 30 / US customers (561) 320-9162 and our technical staff will advise you regarding our products.

Here you can see Precaution Meters from these companies:

The following links provide technical specifications for our Precaution Meters:

- VDE- Precaution Meters 2775
  (Precaution meters to test devices according to following standards 0701/ 0702)

- VDE-Precaution Meters 2765
  (Precaution meters for example for medical devices, VDE standards 0571)

- VDE-Precaution Meters TG basic 1
  (VDE-precaution meters 0701/ 0702, autom. test-performance, good/ bad evaluation)

- VDE-Precaution Meters Safetytest 1L
  (Precaution Meters to test safety of electrical facilities according to VDE 0701/0702)

- VDE-Precaution Meters Safetytest 1N
  (precaution meters zu check VDE 0701/0702, internal data storage for 16000 protocols)

- VDE-Precaution MetersSecutest S2N+  
  (precaution meters according to VDE- 0701 / 702 and VDE- 0751 for electronically medical devices)

- VDE-Precaution Meters Safetytest 3S 
  (precaution meters for single- and 3-phase test objects, internal data storage for measuring protocols)

- VDE-Precaution Meters Metratester 5-3P
  (precaution meters to check devices according to DIN VDE 0701 und 0702)

- VDE-Precaution Meters PV 1
  (precaution meters to check photovoltaic facilities according to VDE 0126-23)

- FI / RCD Precaution Meters PCE-RCD 1     
  (with various test electricity levels / determines tripping electricity and triggering time)

Why is an inspection necessary?
Regular inspections of electric equipment as well as an inspection after every modification and maintenance of these devices are operator obligations. The operator of electric equipment is set to be the person, on whose charge the electric equipment is being operated. In case that person does not fulfill her obligations that person is at higher risk to be liable for possible defects or accidents resulting in personal injuries and property damage. Thus it is important to test electric equipment according to the DIN VDE 701-702 and BGV A3 guidelines.